current article describes application of zeolites in fluid catalytic cracking (fcc). the use of several zeolitic additives for the production light olefins and reduction of pollutants is described. application of zeolites as fluid catalytic cracking (fcc) catalysts and additives due to the presence of active acid sites in the zeolite framework  increase the formation of desired cracking product...

Current article describes application of zeolites in fluid catalytic cracking (FCC). The use of several zeolitic additives for the production light olefins and reduction of pollutants is described. Application of zeolites as fluid catalytic cracking (FCC) catalysts and additives due to the presence of active acid sites in the zeolite framework  increase the formation of desired cracking product...

The catalytic cracking method of PAHs for the pyrolysis gaseous products is proposed to control their pollution to the environment. In this study, the Py-GC-MS is used to investigate in situ the catalytic effect of CaO and Fe2O3 on the 16 PAHs from Pingshuo coal pyrolysis under different catalytic temperatures and catalyst particle sizes. The results demonstrate that Fe2O3 is effective than tha...

_____________________________________________________________ Different catalysts based on Y-zeolite, ZSM-5 and amorphous kaolin were prepared and characterized. The catalytic cracking of 1,3,5-triisopropylbenzene (1,3,5-TIPB), 1,4diisopropylbenzene (1,4-DIPB) and n-dodecane were used to investigate the effect of catalyst nature on the catalytic performance. Cracking the largest molecule (1,3,5...

three high-silica mordenite zeolites differing in sio440, ratio were prepared by direct synthesis without using any template. the products si02/a120, ratio is influenced by the starting gel composition. this ratio is increased upon ion-exchange with nh,cl and subsequent calcination to prepare protonic mordenite. the protonic mordenites with si02/a1203ra tios of 14.6,29.2 and 34.6 were character...

pyrolysis of low density polyethylene (ldpe) by equilibrium fluid catalytic cracking (fcc) was studied in a stirred reactor under different process parameters. in this work, the effect of process parameters such as degradation temperature (420-510°c), catalyst/polymer ratio (0-60%), carrier gas type (h2, n2, ethylene, propylene, ar and he), residence time and agitator speed (0-300 rpm) on the c...

The kinetics of palm oil catalytic cracking over aluminum containing mesoporous silica Al-MCM-41 (5% Al) was investigated in a batch autoclave reactor at the temperatures range of 573 – 673 K. The catalyst was prepared by using sol-gel technique and has been characterized by nitrogen adsorption and x-ray diffraction methods. Surface area of 1276 m/g with average pore diameter of 2.54 nm and por...