in this research iron manganese oxide nanocomposites were prepared by co-precipitation, sol-gel and mechanochemical methods by using iron (iii) nitrate, iron (ii) sulfate and manganese (ii) nitrate as starting materials. these nanocomposites were prepared in the presence of various catalyst beds. the polyvinyl pyrrolidon (pvp) was used as a capping agent to control the agglomeration of the nano...

steam reforming is one of the most important processes for producing hydrogen from hydrocarbon fuels such as lpg and has attracted much attention due to its high efficiency and economy. in this study, the lpg steam reforming reaction was investigated on nickel catalysts supported on four various zeolites (h-y, na-y, hzsm5 and ferrierite). the catalytic tests were performed in a tubular fixed be...

The phase transformation of aluminum hydrates yields various forms of alumina (d, q, K) and eventually alpha-alumina. The decrease in the specific surface area of alumina upon heat treatment is due to changes in crystalline structure and hence a decrease in the porosity of the material, Although the conversion of gamma-alumina to alpha-structure takes place with a lowering in surface area and p...

preparation of 2-chlorobenzonitrile, and benzonitrile are reported here from the corresponding 2-chlorobenzaldehyde and benzaldehyde by the reaction of ammonium hydroxide/vpo titania, vpo bulk (ammonium metavanadate) cucr catalyst/air system in methanol. all these catalysts showed better conversions with reasonable selectivity to aromatic. the results prove that bet surface area results show vp...

Aiming at a detailed understanding of the role of metal−support interactions in the selective methanation of CO in CO2-rich reformate gases, we have investigated the catalytic performance of a set of Ru/TiO2 catalysts with comparable Ru loading, Ru particle size, and TiO2 phase composition but very different surface areas (ranging from 20 to 235 m g−1) in this reaction. The activity for CO meth...

The performance of Mo-enriched, bulk ferric molybdate, employed commercially for the industrially important reaction of the selective oxidation of methanol to formaldehyde, is limited by a low surface area, typically 5-8 m(2) g(-1). Recent advances in the understanding of the iron molybdate catalyst have focused on the study of MoOx@Fe2O3 (MoOx shell, Fe2O3 core) systems, where only a few overl...

Steam reforming is one of the most important processes for producing hydrogen from hydrocarbon fuels such as LPG and has attracted much attention due to its high efficiency and economy. In this study, the LPG steam reforming reaction was investigated on nickel catalysts supported on four various zeolites (H-Y, Na-Y, HZSM5 and Ferrierite). The catalytic tests were performed in a tubular fixed be...

easily prepared nanozno was found to be as an efficient catalyst in the synthesis of 1,4-dhps via four-component reaction of 1,3-dicarbonyls, aldehydes and ammonium carbonate in water at 60 °c. the prepared nanozno was characterized by xrd and ft-ir analysis, while the determined specific surface area of nano catalyst by bet method was 33 m2/g.

The effects of preparative parameters on the surface basicity, composition, and transesterification activities of several Ca-La metal oxide catalysts were investigated. Four different preparation methods: ammonia-ethanol-carbon dioxide precipitation, physical mixing, impregnation, and coprecipitation, were studied. It was found that the ammoniaethanol-carbon dioxide precipitation method resulte...