The metallic low and intermediate level radioactive waste generally consists of carbon steel and stainless steels. The corrosion rate of carbon steel in deep groundwater is typically low, unless the water is very acidic or microbial activity in the environment is high. Therefore, the assessment of microbially induced corrosion of carbon steel in deep bedrock environment has become important for...

The causes and the prevention of carbon steel corrosion in amine systems are reviewed. The corrosive agents are acid gases, oxygen, heat stable salts, amine degradation products, and, in refineries, gas contaminants such as ammonia and hydrogen cyanide. Corrosion mechanisms are provided for carbon steel exposed to amine solutions and for amine regenerator overhead systems containing aqueous con...

The corrosion of steel reinforcement in an aging highway infrastructure is a major problem currently facing the transportation engineering community, in particular bridge engineers. In the United States, maintenance and replacement costs are measured in billions of dollars. Further, the use of deicing salts has resulted in steady deterioration of bridge decks due to corrosion. These concerns ha...

The life of a concrete bridge exposed to deicing salt or seawater has often been limited by corrosion of the steel reinforcement. The service life of a concrete structure, degraded by corrosion, is considered to be the sum of the initiation and propagation periods. The initiation phase is the time required for sufficient accumulation of aggressive species at the rebar surface to initiate corros...

The biodegradable inhibitors, which could effectively reduce the rate of corrosion of carbon steel, were investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The mixed-type inhibitors extracted from Eriobotrya japonica Thunb. leaf exhibited excellent inhibition performance, and the inhibition efficiency for carbon steel reached 90.0% at 298 K in hydroch...

Borated water leakage through spent fuel pools (SFPs) at pressurized water reactors is a concern because it could cause corrosion of reinforcement steel in the concrete structure and compromise the integrity of the structure. Because corrosion rate of carbon steel in concrete in the presence of boric acid is lacking in published literature and available data are equivocal on the effect of boric...

a proposed method for protecting carbon steel and hence reducing iron release in an aqueous solution saturated with h2s is presented in this paper. the method is based on forming a stable and resistant sulfide layer (pyrite, fes2, or pyrrhotite, fe(1-x)s, phase or a mixture of both) on the carbon steel surface. the study on the formation of the sulfide layer was carried out considering the effe...

The corrosion of carbon steel in the chloride-dominated groundwaters anticipated inside a failed spent fuel waste container has been studied in the presence of small concentrations of added hydrogen peroxide. Solutions with peroxide concentrations in the micro-molar range were found to accelerate steel corrosion slightly leading to the formation of Fe-containing corrosion product deposits but n...

A mechanistic model was developed for predicting carbon dioxide corrosion rates of carbon steel pipes in multiphase flow conditions. The model incorporates the chemistry, thermodynamics of carbon dioxide dissolution, multiphase mass transfer, electrochemical kinetics on the metal surface and the presence of a corrosion product film. The predicted corrosion rates show good agreement with the exp...

Results from the international cooperative programme on effects on materials including historic and cultural monuments are presented from the period 1987-2014 and include pollution data (SO₂, NO₂, O₃, HNO₃ and PM10), corrosion data (carbon steel, weathering steel, zinc, copper, aluminium and limestone) and data on the soiling of modern glass for nineteen industrial, urban and rural test sites i...