نتایج جستجو برای: Carbon Fibers
تعداد نتایج: 348506 فیلتر نتایج به سال:
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
The continuity and thickness of the coating layer, are the most important factors in wetting properties and strength of carbon fibers. These factors are crucial in the quality of metal matrix composites made with carbon fibers. In this research the Polyacrylonitrail base carbon fibers have been nickel coated with 0.2, 0.5, 0.8 and 11 ,u in thickness, by the electroless method. The effect of the...
in this study, the strain rate effect on the bending properties of fiber reinforced composites for three types of polymer composites namely phenolic resin reinforced by woven basalt fibers, woven carbon fibers, and woven basalt/ woven carbon fibers at a total volume fraction of approximately 35% has been determined. flexural tests have been conducted at low range of strain rates included 0.03 m...
ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(pan)-based carbon fiber. the surface characteristics of carbon fibers were characterized by x-ray photoelectron spectroscopy (xps). the interfacial properties of carbon fiber reinforced polyamide 6 (cf/pa6) composites were investigated by means of the single fiber pull-out tests. as a result, it...
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
A procedure for preparation of semi-activated carbon fiber (SACF) without any treatment under high temperature was proposed. The first step of the procedure is coating of an inorganic fiber (E-glass fiber) by an adsorbent mixture including powder activated carbon, methyl cellulose and water. In this work a set of experiments was performed to attain appropriate adsorbent mixture for good quality...
This paper demonstrates that the addition of chemical agents and carbon fibers to cement can greatly enhance the shielding effectiveness of the concrete. In addition to improving the shielding effectiveness, carbon fibers and chemical agents enhance the tensile and flexural strengths significant ly. As both carbon fibers and steel fibers are electrically conductive, both can be added to cement ...
We report results of EPR measurements of activated carbon fibers. Experiments made for pristine activated carbon fibers and activated carbon fibers with adsorbed molecules (CCl4, C6H5NO2, and H2O) confirmed the localized character of paramagnetic centers observed in the system. Pristine activated carbon fibers are characterized by single Lorentzian line. Broader component of EPR signal appears ...
This review provides a comparison of submicron-diameter carbon filaments and conventional carbon fibers as fillers in composite materials. Carbon filaments (0.1 mm diameter, catalytically grown) are superior to conventional carbon fibers (discontinuous) as a filler in providing polymer–matrix and cement–matrix composites for electromagnetic performance, but are inferior to the fibers as a fille...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید