When minimizing the size of the spent nuclear fuel repository, two parameters are important: the required total number of canisters and distance between neighbouring canisters (the canister array pitch). If the latter is kept fixed, the Canister Filling Problem arises. On the other hand, if the former is assumed minimal, we come across the Alternative Canister Filling Problem. Both problems are...

O2 diving incidents investigated by our laboratory were related to improper filling of the soda lime canister in closed-circuit oxygen rebreathers. We studied the effect of overfilling or underfilling the canister on CO2 absorption using a continuous flow of 5% CO2. With a full canister in the Oxyger 57, CO2 began to rise at 130-160 min, reaching 1% at 240 min and 1.5% at 270 min. Similar resul...

The weight change per actuation and aerosol particle size and number delivered by albuterol metered dose inhalers (MDIs) were measured in a multiplace hyperbaric chamber at pressures ranging from one atmosphere absolute (1 ATA, 0 feet of seawater, fsw, 101 kPa) to three ATA (66 fsw, 304 kPa). Weight change per actuation by CFC (chlorofluorocarbon) and long canister HFA (hydrofluoroalkane) power...

OBJECTIVE To characterize and evaluate canister floating patterns of three commercially available metered-dose inhalers (MDIs) with varying amounts of medication remaining. DESIGN Four canisters each of three asthma medications were studied. MDIs were actuated every 30 seconds to 60 seconds, and canisters were weighed and floated at 100%, 75%, 66%, 50%, 33%, 25%, 10%, and 0% of remaining labe...

Non-adherence with prescribed asthma treatment causes compromised treatment effectiveness, including greater morbidity, mortality, and health care utilization costs. As a result, there is an increasing interest in measuring patient adherence behaviors. Electronic monitoring devices offer a promising method for assessing patient adherence behavior patterns. The reliability of the Doser Clinical ...

Canister desorption is a widely used technique to measure the gas content of coal. The gas content data, when normalized to volume/weight and multiplied by coal seam mass, is used to estimate the gas in place in an area around the cored hole. However, the gas content and the percentage of each constituent are likely to be influenced by trapped air in the canister at the time of the coal enclosu...

Introduction: The Genesis mission collected solar wind for 27 months at Earth-Sun L1 on both passive and active collectors carried inside of a Science Canister, which was cleaned and assembled in an ISO Class 4 cleanroom prior to launch. The primary passive collectors, 271 individual hexagons and 30 half-hexagons of semiconductor materials, are described in [1]. Since the hard landing reduced t...

canister desorption is a widely used technique to measure the gas content of coal. the gas content data, when normalized to volume/weight and multiplied by coal seam mass, is used to estimate the gas in place in an area around the cored hole. however, the gas content and the percentage of each constituent are likely to be influenced by trapped air in the canister at the time of the coal enclosu...