The partial oxidation and CO2 reforming of methane were studied on Pt/Al2O3, Pt/ZrO2, and Pt/ Ce–ZrO2 catalysts. The reducibility and the oxygen transfer capacity were evaluated by oxygen storage capacity (OSC). The effect of the support on the cleaning mechanism of the catalyst surface was investigated by the sequence of CH4/O2 and CH4/CO2 pulses. The Pt/Ce–ZrO2 catalyst showed the highest sta...

Exploiting the greenhouse gas CO2 as raw material could be more advantageous than its long-term storage. For instance, CO2 can be used on large scale for the production of COrich syngas with a H2/CO ratio of unity. Such a syngas can be used for the synthesis of commodity chemicals like aldehydes and ketones obtained through carbonylation of alkenes in hydroformulation and can be produced by CO2...

Two power plant schemes that reduce CO2 emission and employ natural gas reforming were analyzed and discussed. The first one integrates natural gas reforming technology for efficiency improvement with an oxy-fuel combined power system (OXYF-REF), with water as the main work fluid. The reforming heat is obtained from the available turbine exhaust heat, and the produced syngas is used as fuel wit...

Dry reforming of methane for the production of hydrogen and syngas has attracted much attention from both industrial and environmental aspects. The major problem encountered in the application of this process is the rapid deactivation of the catalyst, which is mainly due to coke accumulation and sintering of the catalyst. As an alternative to reduce the coke formation, the combination of CO2 re...

Kinetic and isotopic tracer methods led to a simple and unifying mechanistic proposal for reactions of CH4 with CO2 and H2O, for its decomposition on Rh clusters, and for water–gas shift reactions. Kinetic rates for forward reactions were measured by correcting net rates for approach to equilibrium and by eliminating transport artifacts. These rates were proportional to CH4 pressure (5–450 kPa)...

Environmental considerations will probably change automobile fuels from gasoline and gas-oil to hydrogen (as fuel cell) in the future. Problems of fossil fuels include producing gaseous pollutants, such as NOx, CO, and even SO2 (from incomplete-hydrotreated fuels), which need catalytic converters and greenhouse gas emission (such as CO2, CH4, N2O) from the exhaust with a drastic effect on globa...

Future large-scale production of H2 for use as a clean fuel will likely depend upon gasifying coal or biomass followed by steam reforming the resulting gas mixture and separating the CO2 byproduct. The process of steam reforming and CO2 separation can be greatly simplified by utilizing a new material that combines a reforming catalyst with a sorbent for CO2. Such a material was prepared in the ...

The thermal valorization of glycerol to produce synthesis gas has been investigated under conventional and microwave heating systems. Different processes (pyrolysis, steam reforming and dry reforming) are compared, using a commercial activated carbon as catalyst. The reforming processes that employ oxidizing agents (CO2 or H2O) were found to promote higher glycerol conversions than mere termal ...

The aim of this work was the evaluation of the catalytic steam reforming of a gaseous fuel obtained by steam biomass gasification to convert topping atmosphere residue (TAR) and CH4 and to produce pure H2 by means of a CO2 sorbent. This experimental work deals with the demonstration of the practical feasibility of such concepts, using a real woodgas obtained from fluidized bed steam gasificatio...

Hydrogen demand in refineries is increasing vigorously due to the stringent transportation fuel specifications, furthermore the interest in the so-called hydrogen economy developed in the recent years put the hydrogen as energy carrier in the centre of a growing interest. More than 95% of the hydrogen for refinery use is nowadays produced via hydrocarbon steam reforming, where Foster Wheeler pl...