This paper presents the details and relevant findings of an experimental program which was conducted in three phases to investigate the behavior of steel-concrete composite bridge girders strengthened with new high modulus carbon fiber reinforced polymer (HM CFRP) materials. In the first phase, the feasibility of various lIM CFRP strengthening systems was examined. The second phase investigated...

Carbon fiber-reinforced polymer (CFRP) composites have been increasingly used in spacecraft applications. Spacecraft may encounter highenergy-density X-ray radiation in outer space that can cause severe damage. To protect spacecraft from such unexpected damage, it is essential to predict the dynamic behavior of CFRP composites under X-ray radiation. In this study, we developed an in-house three...

In this present study, experimental work was conducted to study the effectiveness of newly innovated steel-CFRP composite (CFRP laminates sandwiched between two steel strips) as stirrups. A total numbers of eight concrete beams were tested under four point loads. Each beam measured 1600 mm long, 160mm width and 240 mm depth. The beams were reinforced with different shear reinforcements; one wit...

The use of composite materials and composite stackups in aerospace and automotive applications has been and will continue to grow at a very high rate due to the high strength and low weight of the materials. One key problem manufacturers have using this material is the ability to efficiently drill holes through the layers to install fasteners and other components. This is especially true in sta...

Hierarchical carbon-nanotube (CNT)-based composites have significant potential to expand the performance and functionality of aerospace composite structures. Notably, circumferentially aligned CNT arrays have previously been grown on woven alumina filaments to form a "fuzzy fiber" reinforced plastic (FFRP) architecture with demonstrated improvements in interand intra-ply mechanical properties a...

The purpose of this research was to investigate the creep behaviour of the heterogeneous Timber-UHPFRC beams. New developments have been done to further improve the structural performance, such as strengthening of the timber (glulam) beam by bonding composite material combine with an ultra-high performance fibre reinforced concrete (UHPFRC) internally reinforced with or without carbon fibre rei...

Carbon fiber reinforced plastic (CFRP) was used to adhesively reinforce Chinese fir (Cunninghamia lanceolata) wood specimens. This study examined the flexural static and creep performances of CFPR-reinforced wood composites that had been subjected to changes in moisture and stress levels. The major findings were as follows: 1) the cyclic creep was slightly lower for those specimens subjected to...

Many steel structures are in need of strengthening due to reqUirements to increase carrying capacity and/or rehabili tation due to corrosion degradation. This paper summarizes the results of an investigation that has been conducted to evaluate the performance of carbon fiber reinforced polymer (CFRP) materials to increase the strength and stiffness of steel structures. Two types of specimens we...

S ince 2000, the worldwide market for carbon-fiber-reinforced composite materials (CFRP) has grown from 30,500 to 43,500 tons per year. According to the latest estimates, the demand for carbon fibers will rise to some 1,300,000 tons by 2020 [1]. When preforms are used for manufacturing CFRP parts by the Liquid Composite Molding (LCM) process, up to 40 % waste accrues, resulting in a considerabl...

The incorporation of composite CFRP in wind turbine blades to allow for longer and lighter blades challenges the efficiency of their lightning protection system. The electrical anisotropy of CFRP materials is a key factor and affects their performance. The present study investigates the influence of adding Graphene Oxide (GO) nanoparticles to CFRP as a mean to improve their electrical conductiv...