An experimental study has been carried out to characterize bubble formation, growth, and detachment mechanisms in a stagnant liquid column. Both bubble frequency and bubble detachment size were measured in different gas flow rates, injector diameters and orientations, submergence height, and liquid properties. Experiments were performed for air injection flow rate ranges between 200 mlph and 12...

The present study is performed to numerically analyze growth of a vapor bubble during flow of water in a microchannel. The complete Navier-Stokes equations along with continuity and energy equations are solved using the SIMPLER method. The liquid vapor interface is captured using the level set technique. The microchannel is 200 microns in square cross-section and the bubble is placed at the cen...

We report experimental data of bubble growth in natural rhyolitic melt with 1.4^2.0 wt% initial total H2O at 0.1 MPa and 500^6003C. Growth of many bubbles is monitored in every experiment. Bubble growth rate increases with temperature and initial total H2O. At a given temperature and initial total H2O, bubble growth rate also increases slightly with bubble size. The average growth rate for bubb...

The present study is performed to numerically analyze the growth of a vapor bubble during flow of water through a microchannel. The complete Navier– Stokes equations, along with continuity and energy equations, are solved using the SIMPLER (semi-implicit method for pressure-linked equations revised) method. The liquid–vapor interface is captured using the level set technique. The microchannel i...

We report an experimental study of bubble dynamics in a non-Newtonian fluid subjected to a pressure decrease. The fluid is a hydrogel, composed of water and a synthetic clay, prepared and sandwiched between two glass plates in a Hele-Shaw geometry. The rheological properties of the material can be tuned by the clay concentration. As the imposed pressure decreases, the gas initially dissolved in...

Numerical simulation of bubble growth during pool boiling under the influence of low frequency vibration was performed to understand the influence of common vibrations such as those induced by wind, highway transportation, and nearby mechanical devices on the performance of thermal systems that rely on boiling. The simulations were done for saturated R123 boiling at 277.6 K with a 15 K wall sup...

Epstein and Plesset's seminal work on the rate of gas bubble dissolution and growth in a simple liquid is generalized to render it applicable to a gas bubble embedded in a soft elastic solid. Both the underlying diffusion equation and the expression for the gas bubble pressure were modified to allow for the non-zero shear modulus of the medium. The extension of the diffusion equation results in...

High-speed video and infrared thermometry were used to obtain timeand space-resolved information on bubble nucleation and heat transfer in pool boiling of water. The bubble departure diameter and frequency, growth and wait times, and nucleation site density were directly measured for a thin, electrically-heated, indium-tin-oxide surface, laid on a sapphire substrate. These data are very valuabl...

Natural cavitation is defined as the phenomenon of the formation of vapor bubbles in a flow due to the pressure falls below the liquid’s vapor pressure. The inception of the cavitation bubble is influenced by many factors, such as impurities, turbulence, liquid thermal properties etc. In this paper, we simulate a 2D cavitation ”bubble” growth under shear flow in the inception stage by Single-Co...