The energy absorption of concrete filled, hollow-steel bracing was analyzed respect to geometric and mechanical parameters including the width-to-thickness section ratio, slenderness level, and strength of the steel and concrete. Local buckling and ductility were also investigated with respect to variation in the cross-section. The infill increased the compression resistance, even after multipl...

This paper investigates the applicabilty of an innovative bracing, called Articulated Quadrilateral (AQ) bracing system, which uses shape memory alloys (SMAs), for retroffiting low-rise to high-rise vulnerable SMFRs against strong ground motions. The paper investigates brace fundamental engineering characteristics, design of the system and also configuration of the brace (the proportion of SMA ...

Abstract:   Previous research on bracing members show that the ductility of bracing members is compromised due to the buckling phenomena. Therefore, many researchers have tried to use special considerations to increase the fracture life of bracing members. Some of these recommendations such as increasing the slenderness ratio, using lower width to thickness ratio, increasing the out-of-p...

Cross-bracing (X-bracing) is one of the most popular methods of seismic retrofitting, and has been shown to significantly increase the structural stiffness and strength of buildings. Conventional steel X-bracing methods typically exhibit brittle failure at the connection between the brace and the building, or buckling failure of the braces. This study investigated the structural properties of a...

Steel bracing members are widely used in steel structures to reduce lateral displacement and dissipate energy during earthquake motions. Concentric steel bracing provide an excellent approach for strengthening and stiffening steel buildings. Using these braces the designer can hardly adjust the stiffness together with ductility as needed because of buckling of braces in compression. In this stu...

The utilization of passive energy dissipation systems has been created a revolution in the structural engineering industry due to their advantages. Fluid Viscous Damper (FVD) is one of these control systems. It has been used in many different industries, such as the army, aerospace, bridge, and building structures. One of the essential questions about this system is how it can combine with the ...

One of the most crucial components of a tall building is its lateral loading system. In this paper, we provide the development of a lateral bracing system that results in bracing material savings of up to 50% relative to a traditional X-Bracing system, as well as lighter corner columns due to the more efficient load paths of the lateral forces to the base. The solution naturally follows a linea...

This research suggests a novel method to use steel cables as a structural bracing system. The Moment Resisting Frame (MRF) works in tandem with the cable bracings when this method is used. The suggested bracing model can address the fundamental problem of current cable bracing methods, namely the lack of flexibility while keeping costs to a minimum. This approach requires no additional equipmen...

BACKGROUND The aim of our study is to evaluate the ability of a pre- fabricated humeral bracing system in providing sufficient stability to fracture union and carry out a cost analysis comparing bracing versus surgical fixation for these fractures. MATERIAL AND METHODS A review of humeral shaft fractures treated with a pre-fabricated humeral bracing system was undertaken. RESULTS 20 humeral...