Strength prediction is discussed using a traction-separation damage model incorporating material softening for bolted joint that fails in bearing mode. The modelliug approach in the bolted double-lap joint of current work is a simplistic approach to predict the strength of bearing failures. This is clearly shown in bearing failure which occurred experimentally at higher W/d ratios. A simple met...

At the initial phase of the mechanical product development, it is very important to effectively obtain the modal damping ratio of the bolted joint structure for accurately predicting dynamic response. The energy dissipation has been estimated using a finite element model incorporating the effect of pretension force of the bolted joint. First, the modal damping ratios of the first four modes are...

Mechanical fasteners especially bolting is commonly used in joining carbon-fiber reinforced polymer (CFRP) composite structures due to their good joinability and easy for maintenance characteristics. Since this approach involves with notching, a proper progressive damage model (PDM) need to be implemented and verified to capture existence of damages in the structure. A three dimensional (3D) fa...

In this study, analytical models considering different material and geometry for ‎both single and double-lap bolted joints were reviewed for better understand how to ‎select the proper model for a particular application. The survey indicades that the ‎analytic models selected for the adhesively single or double bolted lap joints, as well ‎as T, scarf, and stepped joints, with linear material pr...

In this research, the effects of torque tightening on the stress distribution in double lap simple bolted and hybrid (bolted-bonded) joints have been investigated numerically. In order to determine the bolt clamping force value due to tightening torque in simple bolted and hybrid joints, which is necessary in numerical simulation, an experimental approach has been proposed. To do so, two kinds ...

A three-dimensional finite element model of the joint has been developed. The model has been used to predict the stress field of the laminate in the joint area, assuming homogeneity and linear behavior of the material. The modeled geometry is a T-bolt that joins a coupon of glass fiber–epoxy and a block of steel. The results obtained from the model have been verified experimentally using both e...

Abstract In this study, the joint strengths of single-lap bolted and bolted/bonded (hybrid) joints formed by using four different engineering plastics were experimentally investigated. High-density polyethylene (HDPE), ultra-high molecular weight polyethylene, Delrin (POM), Teflon used as plate materials in connections. Standard M6 bolts bolt The specimens prepared single bolted, double bolted/...

The significant features of the GFRP angle make it one modern construction members for present lattice-type Transmission Line Towers (TLT) made out mild steel. structural with gusset plate connections net-crushing strength are investigated in this study, an emphasis on to transmission line towers. Forty-two specimens single-lap, butt joints bolted considered study. and edge distance have differ...

This paper aims at investigating the nonlinear behavior of a system which is consisting of two free-free beams which are connected by a nonlinear joint. The nonlinear system is modelled as an in-extensional beam with Timoshenko beam theory. In addition, large amplitude vibration assumption is taken into account in order to obtain exact results. The nonlinear assumption in the system necessities...