The connectivity index chi can be regarded as the sum of bond contributions. In this article, boiling point (bp)-oriented contributions for each kind of bond are obtained by decomposing the connectivity indices into ten connectivity character bases and then doing a linear regression between bps and the bases. From the comparison of bp-oriented contributions with the contributions assigned by ch...

abstract: in this study an appropriate computational approach was presented for estimating the boiling temperatures of 41 different types of olefins and their derivatives. based on the guidelines of this approach, several structural indices related to the organic components were applied using graph theory. meanwhile, in addition to evaluating the relation between the boiling temperatures of ole...

The influence of the initial fuel temperature on the burning behavior of n-heptane pool fire was experimentally studied at the State Key Laboratory of Fire Science (SKLFS) large test hall. Circular pool fires with diameters of 100mm, 141 mm, and 200 mm were considered with initial fuel temperatures ranging from 290 K to 363 K. Burning rate and temperature distributions in fuel and vessel wall w...

Subcooled flow boiling in multi-microchannels can be used as an efficient thermal management approach in compact electrical devices. Highly subcooled flow boiling of HFE 7100 is studied in two microchannel heat sinks to choose a proper numerical model for simulating boiling flows in microchannels. Results of five different numerical models, including Volume of Fluid (VOF), Eulerian boiling, Eul...

One of the most practical means of measuring this important variable is by the temperature of the boiling syrup at a known absolute pressure or by reference to the temperature of water boiling at the same pressure. The so-called “Boiling Point Elevation” or “BPE” has long been used for this purpose. A considerable amount of care must be exercised in making the temperature measurements if they a...

The heat of vaporization of a pure substance at its normal boiling temperature is a very important property in many chemical processes. In this work, a new empirical method was developed to predict vaporization enthalpy of pure substances. This equation is a function of normal boiling temperature, critical temperature, and critical pressure. The presented model is simple to use and provides an ...

Transient nucleate pool boiling experiments using R113 are conducted for short times in microgravity and in earth gravity with different heater surface orientations and subcoolings. The heating surface is a transparent gold film sputtered on a quartz substrate, which simultaneously provides surface temperature measurements and permits viewing of the boiling process from beneath. For the microgr...

We report a novel boiling heat transfer (NBHT) in reduced graphene oxide (RGO) suspended in water (RGO colloid) near critical heat flux (CHF), which is traditionally the dangerous limitation of nucleate boiling heat transfer because of heater failure. When the heat flux reaches the maximum value (CHF) in RGO colloid pool boiling, the wall temperature increases gradually and slowly with an almos...

0142-727X/$ see front matter 2008 Elsevier Inc. A doi:10.1016/j.ijheatfluidflow.2008.08.003 * Corresponding author. Tel.: +1 979 845 4500; fax E-mail address: [email protected] (D. Banerjee Surface temperature fluctuations that occur locally underneath departing bubbles in pool boiling are shown to result in local heat transfer coefficients ranging from 1 to 10 kW/cm. These estimates were repo...