Nanocomposites films of (polymer blend-ceramics) were prepared from (PVA-PAA) blend and (PVA-PAA) blend doped with niobium carbide nanoparticles for humidity sensors have low cost, easy fabrication, high sensitivity, lightweight and high corrosion resistance. The structural, electrical and optical properties of (PVA-PAA-NbC) nanocomposites have been studied. The D.C electrical properties of (PV...

in this study, the possibility of producing wood-plastic panels was studied using two different blending methods including melt blend and dry blend. wood-plastic panels were made from recycled high density polyethylene (as resin) and mdf waste (as natural fiber) at 60, 70 and 80% by weight filler loading. nominal density and dimensions of the panels were 1g/cm3 and 35×35×1 cm, respectively. the...

Naïve Cotesia vestalis wasps, parasitoids of diamondback moth (DBM) larvae, are attracted to a synthetic blend (Blend A) of host-induced plant volatiles composed of sabinene, n-heptanal, α-pinene, and ( Z)-3-hexenyl acetate, in a ratio of 1.8:1.3:2.0:3.0. We studied whether qualitative (adding ( R)-limonene: Blend B) or quantitative changes (changing ratios: Blend C) to Blend A affected the olf...

A diacid monomer was synthesized by the condensation of L-tryptophan amino acid and pyromellitic dianhydride (PMDA). The diacid was utilized for the synthesis of three types of poly(amide-imide)s (PAIs) using three different kinds of diamines. The synthesized monomer and PAIs were characterized using FT-IR, 1H-NMR and 13C-NMR spectroscopies and the PAIs were also used ...

polycaprolactone (pcl) and poly(butylene terephthalate) (pbt) blend was prepared by melt processing. the pcl/pbt blend showed similar morphology with that of pure pcl.the crystallization temperature of pcl was increased by the incorporation of pbt. it was also observed that the peak height in the dsc thermograms decreased and then disappeared by adding 40 % or more pbt which might be due to the...

Membrane separation is known as an efficient technique for the oily wastewater treatment. Therefore, in the present study, sulfonated poly (ether ether ketone) (SPEEK) was introduced into the polysulfone (PSF) solution in order to enhance the hydrophilicity and the membrane structure for the oil–water separation. The hollow fiber membranes were fabricated via a phase-inversion process. The memb...

in the present study, floating drug delivery beads (fdds) were prepared with sodium alginate/ starch blend as a matrix, sodium hydrogen carbonate as a pore forming agent, methyl cellulose as a binder and barium chloride solution as a hardening agent. in order to prepare the beads with different porosity and morphology the ratio between pore forming agent to polymer blend and ratio of the consti...

nowadays, polymer blends usages increase more and more in order to produce materials with better properties. according to many research works, the blends of polyolefins have shown industrial importance. the purpose of this project was to carry out some investigations on fibers melt spun from the polypropylene and low density polyethylene blends. pp and ldpe are immiscible. pp/ldpe blend filamen...

In this study, poly carbonate (PC) and poly (ethylene terephthalate) (PET) were reactive melt-blended under two different conditions to produce PC/PET copolymers. For each condition, samples were taken at specified mixing times representative a specific structure of copolymers and each one employed to physically compatibilize a PC/PET blend with a fixed composition. Reactive blending and copoly...

TThis study investigated the water absorption of chitosan, collagen, and chitosan/collagen blend membranes exposed to gamma-ray irradiation. These membranes were produced via the solvent evaporation method. All membranes then underwent irradiation at 15 or 25 kGy gamma-ray doses, while membranes without irradiation were used as controls. After immersing the membranes in distilled water for up t...