Biomass can be utilized to produce bio-oil, a promising alternative energy source for the limited crude oil. There are mainly two processes involved in the conversion of biomass to bio-oil: flash pyrolysis and hydrothermal liquefaction. The cost of bio-oil production from biomass is relatively high based on current technologies, and the main challenges are the low yield and poor bio-oil quality...

In this study, cattle manure was converted to bio-oil by subcritical hydrothermal liquefaction in the presence of NaOH. The effects of conversion temperature, process gas, initial conversion pressure, residence time and mass ratio of cattle manure to water on the bio-oil yield were studied. The bio-oil was characterized in terms of elemental composition, higher heating value, ultraviolet-visibl...

Bio-oil, a mixture of complex oxygenated hydrocarbons, is obtained through fast pyrolysis of solid biomass. As biomass is low in energy density and not easily transportable, a novel approach is to convert biomass to bio-oil, transport bio-oil to a centralized facility, gasify bio-oil to syngas, and upgrade syngas to transportation fuels and other high-value chemicals. In this study, a comprehen...

Resorcinol-formaldehyde (RF) resin is a kind of excellent exterior-grade wood structural adhesive, which can be conveniently cold-set for various applications. In order to decrease the production cost, pyrolysis bio-oil from renewable bioresources was used to replace resorcinol to synthesize the bio-oil-resorcinol-aldehyde (BRF) resin. The effect of replacing resorcinol with bio-oil on the prop...

BACKGROUND Succinic acid is one of the key platform chemicals which can be produced via biotechnology process instead of petrochemical process. Biomass derived bio-oil have been investigated intensively as an alternative of diesel and gasoline fuels. Bio-oil could be fractionized into organic phase and aqueous phase parts. The organic phase bio-oil can be easily upgraded to transport fuel. The ...

.................................................................................................................................. vi CHAPTER 1. GENERAL INTRODUCTION ............................................................................... 1 References ....................................................................................................................... 7 CHAPTER 2. COMPA...

The biofuel mix in transport in the UK must be increased from currently exploited 3.33% to the EU target mix of 10% by 2020. Under the face of this huge challenge, the most viable way forward is to process infrastructure-compatible intermediate, such as bio-oil from fast pyrolysis of lignocellulosic biomass, into biofuels. New facilities may integrate multiple distributed pyrolysis units produc...

Bio-oil from fast pyrolysis of biomass is a low-grade liquid fuel, which can be upgraded through the emulsification with diesel oil. In this study, we prepared two rice husk bio-oil samples with different solid char contents and three bio-oil/diesel-oil emulsion samples with the bio-oil content of 10 wt%, 30 wt% and 50 wt%, respectively. The lubrication properties of these oil samples were eval...

The use of cost effective solvents may be necessary to store wood pyrolysis bio-oil in order to stabilize and control its viscosity, but this part of the production system has not been explored. Conversely, any rise in viscosity during storage, that would occur without a solvent, will add variance to the production system and render it cost ineffective. The purpose of this study was to modify b...

Pretreatment of corncobs using torrefaction was conducted in an auger reactor at 250-300 °C and residence times of 10-60 min. The torrefied corncobs were fast pyrolyzed in a bubbling fluidized bed reactor at 470 °C to obtain high-quality bio-oil. The heating value and pH of the bio-oil improved when the torrefaction as pretreatment was applied; however, increasing bio-oil yield penalties were o...