The effects of different coating time of PANI/Silver onto polysulfone (PSf) membrane surface were investigated based on the morphology, contact angle, surface roughness and rejection towards BSA, pepsin and trypsin. The membrane was prepared by employing the pressure deposition method toward phase inversed membrane. Thus, PANI particles were forced to adhere on membrane surface by pressure driv...

In this study, flat sheet asymmetric polyphenylsulfone (PPSU) ultrafiltration membranes with enhanced antifouling properties were prepared with a non-solvent induced phase separation (NIPS) method through compound additives containing a polymeric pore-forming agent, a small molecular non-solvent and a surfactant. The formation processes of the porous asymmetric membranes with different kinds of...

In this study, the polyvinylidene fluoride (PVDF) hollow fiber hemodialysis membranes were prepared by non-solvent induced phase separation (NIPS). The influences of PVDF membrane thickness and polyethylene glycol (PEG) content on membrane morphologies, pore size, mechanical and permeable performance were investigated. It was found that membrane thickness and PEG content affected both the struc...

Take the ethylene-vinyl alcohol (EVAL) copolymer as the infrastructural material, the anion exchange resin D301R as the functional grains, adopt dry-wet method to make resin-filled EVAL hollow fiber membrane, test the pure water flux of the membrane, the rejection rate of the bovine serum albumin (BSA) and the static absorption performance of BSA. Check the influences of coagulation bath temper...

This study aimed to investigate the effect of Gadolinium oxide (Gd2O3) concentration (0.5%, 1%, and 2%) on performance polysulfone (PSF) membrane. The membranes were fabricated by a common phase inversion method. was determined based pure water flux, bovine serum albumin (BSA) permeation test. These characterized FTIR contact angle measurements. highest BSA rejection 53%. optimum membrane (2 % ...

This study investigated filtration behaviors of polysaccharides solutions, both alone and in mixture with proteins, in the short-time constant flux filtration with the focus on factors affecting the transmembrane pressure (TMP) increase rate, the irreversible filtration resistance, and the membrane rejection behavior. The results showed that the TMP increase rates in the short-time constant flu...

In this study, three types of Al2O3 powders were used as raw materials to fabricate and evaluate the performance all-alumina multi-layer filters, an attempt was made ultrafiltration filter that separates removes proteins. When bovine serum albumin (BSA, molecular weight 66,000) protein, a very high rejection rate 91.9 % obtained even under mild conditions with differential pressure 1 atm or less.

The increasing and wide application of silver nanoparticles (Ag NPs) has resulted in their appearance in wastewater. In consideration of their potential toxicity and environmental impacts, it is necessary to find effective technology for their removal from wastewater. Here, forward osmosis (FO) membrane was applied for Ag NPs removal from wastewater, and single and combined fouling of nanoparti...

The objective of this work is to develop a new class of nanocomposite ultrafiltration (UF) membranes with excellent solute rejection rate and superior water flux using zeolitic imidazolate framework-8 (ZIF-8) and multi-walled carbon nanotubes (MWCNTs). The effect of ZIF-8 and MWCNTs loadings on the properties of polyvinyldifluoride (PVDF)-based membrane were investigated by introducing respecti...

The intestinal mucosa of commercial poultry is continually subjected to invasion or colonization by a wide array of potentially hostile enteric pathogens. Although, recent investigations have focused on lymphocyte involvement in immune responses in the intestine, lymphocyte-mediated immunity alone will not explain the barrier nature of mucosal membranes associated with rejection of many enteric...