An investigation into influence of the austenitising temperature and the austenite deformation temperature on Nb precipitation and recrystallisation kinetics was carried out for a steel containing 0.081C-0.021Ti-0.064Nb (wt. %). The austenite grain structure was correlated to the dispersive properties of Nb atom clustering and precipitation. Irrespective of the austenitising temperature, deform...

Nanostructured bainite was obtained in high-carbon Si-Al-rich steel by low-temperature (220-260 °C) isothermal transformation after austenitisation at different temperatures (900 °C, 1000 °C, and 1150 °C). Improved strength-ductility-toughness balance was achieved in the nanostructured bainitic steel austenitised at low temperatures (900 °C and 1000 °C). Increasing the austenitising temperature...

A formula is proposed to calculate the chemical austenitising temperature derived by means of a neural network model. A wide range of compositions were used, allowing to predict changes of tendency in the slopes of the austenitisation temperature, consistent with the existence of a eutectoid composition.

the influence of aluminium on the microstructure of austempered ductile cast iron (adi) has been studied. the presence of well distributed graphite in the matrix, and a relatively high volume fraction of retained austenite are responsible for the good mechanical properties of the aluminium alloyed austempered ductile irons including excellent wear resistance, higher resistance to thermal shock,...

This work considers use neurofuzzy set theory for estimate abrasion wear resistance of steels based on chemical composition, heat treatment (austenitising temperature, quenchant and tempering temperature), hardness after hardening and different tempering temperature and volume loss of materials according to ASTM G 65-94. Testing of volume loss for the following group of materials as fuzzy data ...

the influence of aluminium on the microstructure of austempered ductile cast iron (adi) has been studied. anumber of irons of different compositions have been made by green sand casting and gravity die casting ofappropriate design to provide the experimental materials. austenitising was carried out at different temperaturesand holding times for a variety of experimental irons to achieve suffici...