Uniform linear array (ULA)-based tapped-delay line (TDL) structure has good performance metrics when the signal sources are located at the middle angles. It offers poor performance when the signal sources are close to the array endfire. In this paper, a new approach is proposed which offers higher performance and desired beamforming on TDL structure when the wideband uncorrelated radio sources ...

uniform linear array (ula)-based tapped-delay line (tdl) structure has good performance metrics when the signal sources are located at the middle angles. it offers poor performance when the signal sources are close to the array endfire. in this paper, a new approach is proposed which offers higher performance and desired beamforming on tdl structure when the wideband uncorrelated radio sources ...

In [2], Duhamel obtained the optimal endfire array excitation by extending the Riblet’s broadside array design method. So, similar to the Riblet’s distribution, the obtained endfire distribution is limited to odd numbered arrays. In this section, authors present a broadened formulation which can be used for both even as well as odd numbered arrays. The basic idea behind this formulation comes f...

This paper presents a novel way for achieving endfire radiation pattern using microstrip patch antenna array. The extensively used microstrip patch antennas i.e. rectangular and circular microstrip patch antennas, either single patch or in an array configuration do not have an endfire radiation pattern. The antenna array presented in this paper is designed by changing the geometry of the antenn...

The proposed wideband shorted planar inverted cone antenna (SPICA) has been described as a two element antenna array in this paper. The two element array by this antenna with proper phase of excitation and spacing between the elements provide superdirective array characteristic. This array gives peak endfire directivity from 3.502 dBi to 10.3 dBi and radiation efficiency above 98% in the operat...

Due to relatively simple implementation, Uniform Linear Array (ULA) is a popular geometry for array signal processing. Despite this advantage, it does not have a uniform performance in all directions and Angle of Arrival (AOA) estimation performance degrades considerably in the angles close to endfire. In this article, a new configuration is proposed which can solve this problem. Proposed Array...

in order to estimate doa of coherent sources, shirvani moghaddam and keshavarz nasab proposed a method based on uniform linear array configuration that first determines the number of noncoherent sources and then estimates the doa of coherent signals in each group. for estimating doas close to the array endfire, ula does not perform well. as the main goal of this investigation, using the propose...

In this paper, a new kind of end-fire array was built by employing high directivity plate end-fire antenna as the basic element based on electromagnetic surface wave theory. Being different from normal end-fire array, in the new array, high directivity plate endfire antenna elements were arranged end to end along the end-fire direction, and the interelement spacing and uniform progressive phase...

The method of eigenvector subspace projection is applied to data collected on a bottom-mounted horizontal line array located on the U. S. continental shelf east of Ft. Lauderdale, FL, in order to investigate the impact of the ocean environment on array noise gain (ANG). Array sidelobe response associated with the continual passage of ships into nearby Port Everglades tends to obscure the impact...