Electric arc furnace dust (EAFD) is generated in considerable amounts by the electric arc steelmaking process. During melting in an electric arc furnace, certain elements volatilize, and form fine dusts after cooling. The EAFD is collected in a baghouse and amounts to approximately 1–2 wt% of the steel produced.1) In China, about 800 million tons of steel was produced in 2015 with more than 9 w...

Power quality is becoming a more concern of today’s power system engineer due to rapid growth of non-linear loads in distribution network. Electrical Arc Furnace (EAF) is one of the responsible causes for deteriorating power quality in the distribution network. Hence electric arc furnace model is needed to study and to analyze the power quality in the distribution network. This paper presents a...

This paper presents a new application of a fractional order control system which controls the input energy to a three phase electric arc furnace. Graphite electrodes are used to convert electrical energy into heat via phase electric arcs. Constant arc length is desirable as it implies steady energy transfer from the graphite electrodes to the metallic charge in the furnace bath. With the charge...

This paper introduces a multilevel STATCOM for electric arc furnace power quality enhancement. An eleven level cascaded multilevel converter is used to alleviate the impacts of an unbalanced arc furnace load. The STATCOM provides a power electronic-based means of embedded control for reactive power support.

synopsis-in this research, possible usage of eaf dust on cement is investigated. therefore, effects of addition of different percentages of eaf dust on the most important properties of cement such as hydration heat, water coefficient, viscosity, initial and final setting times, strength development and leachability of heavy metals were studied. results showed that eaf dust alters the characteri...

Power quality determines the fitness of electrical power to consumer devices. .Voltage flicker and harmonics are the types of power quality problems that are introduced to the power system as a result of arc furnace operation. Utilities are concerned about these effects and try to take precautions to minimize them. Therefore an accurate model of an arc furnace is needed to test .In this paper a...

Research is made into the fuzzy control of electrode regulator systems of submerged electrical arc ferrosilicon furnace EAF. The equations of the electrode currents and furnace resistances are derived based on certain model for the submerged arc ferrosilicon furnace. This model takes into consideration the walls of furnace and the heat losses into external medium in addition to the heat transfe...

Ferrochrome is the major chromium source for stainless steel production, and submerged-arc furnaces (SAF) are most commonly utilised to smelt chromite ores into ferrochrome by using suitable carbonaceous reductants such as coke. Because of the complexity of feed structure and electrical-thermal-chemical interactions, there exist large gradients and wide distributions of temperature, mineralogy ...

An EMTP-based arc furnace model was developed for evaluation of flicker concerns associated with supplying a large integrated steel mill as they go from one to two furnace operation and as system changes are implemented that will affect the short circuit capacity at the 230 kV power supply substation. The model includes a dynamic arc representation which is designed to be characteristic of the ...

In this paper, we study the establishment of AC electric arc furnace model via chaotic circuit. First, the static model based on energy conservation theory is established. Then, a dynamic model based on static model created previous is built to simulate AC electric arc furnace dynamic characteristics. Chua’s chaotic circuit is selected to generate modulation wave. The results obtained by using ...