Introduction: There is currently significant interest in all-ceramic dental restorations. A potential non-metallic material for such restorations is an apatite-mullite glass-ceramic that could be processed to shape using different processing techniques. The aim of this study was to assess and evaluate the ability of an apatite-mullite glass-ceramic material to be processed using three routes: l...

This paper will report on research which aims to generate bone replacement components by processing bioactive glass-ceramic powders using indirect selective laser sintering. The indirect SLS route has been chosen as it offers the ability to tailor the shape of the implant to the implantation site, and two bioactive glass ceramic materials have been processed through this route: apatite-mullite ...

Zincand silver-doped mullite ceramic discs were prepared and tested as potentially resistant materials against bacterial adhesion and biofilm formation. Elemental analysis and X-ray diffraction studies showed that zinc ions were incorporated in the structural framework of the mullite, while silver ions remained outside the mullite crystal lattice, which allowed their slow (0.02 ppm/24 hours) le...

The high temperature treatment of kaolinite-muscovite alternate layers doped by bismuth oxide was studied by TGA and DTA, X ray diffraction, and electron microscopy (SEM). Thermal analyses shows that the two main transformation stages are the dehydroxylation of phyllosilicates and the structural reorganization of the whole assembly. During dehydroxylation, a progressive decrease of the structur...

A mullite/mullite nanocomposite powder has been synthesized, composed of nanometer-size 3Al2O3 · 2SiO2 (‘3 : 2’) mullite precipitates within a matrix of the high alumina 2Al2O3 · SiO2 (‘2 : 1’) mullite. Historically, the transition from the metastable high-alumina phase to the thermodynamically stable ‘3 : 2’ phase of mullite has been thought to be a continuous process, involving a continuous s...

Whiteware compositions prepared using Pugu kaolin and industrial grade quartz and feldspar were studied with respect to varying sintering temperatures. The strength developed was correlated to mullite (3Al2O3.2SiO2) content and the microstructure. It was observed that within the vitrification temperature range, the strength mainly depended on the mullite content and the bulk density. Above the ...

Mullite fibers with diameters from 400 nm to 10 lm were fabricated from the sol–gel precursors using the electrospinning method. During the precursor synthesis, the hydrolysis was controlled to obtain highly viscous mullite sols. The viscous mullite sols were then diluted and mixed with a small amount of polyethylene oxide. Controlling the precursor rheology and spinning conditions, we obtained...