the research mainly intends to evaluate performance of strontium aluminum polyphosphate as an eco friendly zinc free anticorrosion pigment in formulation of the protective primer based on epoxy resin. comparing to zinc phosphate, the most effective content of the modified pigment was determined through electrochemical impedance spectroscopy. according to pull-off, the superior sapp incorporated...

Carbon nanotubes (CNT) were dispersed into homemade silicone–polyurethane (SPU) resin in order to enhance their mechanical and anticorrosion ability. Before mixing with SPU, CNT modified by four different approaches improve dispersion the surface of covered SiO2–TiO2 nanoparticles, -NH2 groups, epoxy groups or isocyanate respectively. The structures CNTs checked XRD, FTIR, SEM. After being SPU ...

Waterborne coating has recently been paid much attention. However, it cannot be used widely due to its performance limitations. Under the specified conditions of the selected resin, selecting the function pigment is key to improving the anticorrosive properties of the coating. Zinc phosphate is an environmentally protective and efficient anticorrosion pigment. In this work, zinc phosphate was u...

Aluminum alloys are vulnerable to penetrating and peeling failures in seawater and preparing a barrier coating to isolate the substrate from corrosive medium is an effective anticorrosion method. Inspired by the lotus leaves effect, a wetting alloy surface with enhanced anticorrosion behavior has been prepared via etch, deposition, and low-surface-energy modification. Results indicate that exce...

We demonstrate a strategy of incorporation and opening of light-sensitive containers in anticorrosion coatings for construction of very efficient light responsive protective coatings.

Abstract According to the anticorrosion demand of petrochemical pressure vessel storing acid medium, phenolic epoxy resin and modified amine curing agent was used, a tertiary accelerator added, fast-curing acid-resistant anticorrosive coating with excellent acid-resistance developed by adding appropriate amount flake pigments fillers such as graphene chemical additives. Through Performance Test...

Based on silsesquioxanes (SSO) derived from the hydrolytic condensation of (γ-glycidyloxypropyl)trimethoxysilane (GPMS) and titanium tetrabutoxide (TTB), hybrid films on aluminum alloy (AA), film-GPMS-SSO (f-GS) and f-GS-TTBi% (f-GSTT5%–25%, i = 5, 10, 15, 20 and 25 wt%), were prepared and tested by electrochemical measurements with typical potentiodynamic polarization curves. The Icorr values ...

Basalt rockwool wastes with large output, which are toxic and require expensive environmental treatment, produced during the production of rock wool. Hence, it is urgent to find an effective method reuse these materials. In this study, polyaniline (PANI)-coated basalt (BRWs) were prepared as fillers serve in coatings for anticorrosion study. Results show that PANI-coated BRW (PANI@BRW) had enha...

Anticorrosion and antioxidation surface treatments such as paint or anodization are a foundational component in nearly all industries. Graphene, a single-atom-thick sheet of carbon with impressive impermeability to gases, seems to hold promise as an effective anticorrosion barrier, and recent work supports this hope. We perform a complete study of the short- and long-term performance of graphen...