نتایج جستجو برای: Anode-bed
تعداد نتایج: 60464 فیلتر نتایج به سال:
The influence of the anode bed geometry on the hydraulic behaviour of PEM fuel cells is assessed. Three basic geometrical patterns are studied, namely the interdigitated, the parallel and the serpentine ones, in their original, as well as in modified forms of them, in which their angles have been smoothed. Issues concerning the anode flow field of a fuel cell, the influence of the Reynolds numb...
In this study, we designed a microbial electrochemical fluidized bed reactor (ME-FBR), with an electroconductive anodic bed made of activated carbon particles for treating a brewery wastewater. Under a batch operating mode, acetate and propionate consumption rates were 13-fold and 2.4-fold higher, respectively, when the fluidized anode was polarized (0.2 V) with respect to open circuit conditio...
A high full-electrode basis capacity secondary battery anode consisting of a template-free 3D nanostructured Fe3O4/C composite is presented. On a full electrode basis, the nanocomposite exhibits attractive electrochemical performance including a volumetric capacity of 1064 mAh cm(-3), which significantly exceeds both the practical (≈300 mAh cm(-3)) and theoretical (837 mAh cm(-3)) capacity of a...
Porous- and hollow-structured LiNb3O8 anode material was prepared by a hydrothermal-assisted sintering strategy for the first time. The phase evolution was studied, and the formation mechanism of the porous and hollow structure was proposed. The formation of the unique structure can be attributed to the local existence of liquid phase because of the volatilization of Li element. As the anode ma...
S-doped carbon is investigated as a high-performance anode material for sodium-ion batteries. Due to the introduction of a high-content of S atoms, the as-obtained S-doped carbon shows an enlarged interlayer distance. As an anode, a high specific capacity of up to 303 mAh g-1 is achieved, even after 700 cycles at 0.5 A g-1.
Graphene oxide-wrapped amorphous copper vanadium oxide is fabricated through a template-engaged redox reaction followed by vacuum dehydration. This material exhibits high reversible capacity, excellent rate capability, and out standing high-rate cyclability. The outstanding performance is attributed to the fast capacitive charge storage and the in situ formed copper with enhanced electrical con...
A red phosphorus-graphene nanosheet hybrid is reported as an anode material for lithium-ion batteries. Graphene nanosheets form a sea-like, highly electronically conductive matrix, where the island-like phosphorus particles are dispersed. Benefiting from this structure and properties of phosphorus, the hybrid delivers high initial capacity and exhibits promising retention at 60 °C.
MnCO3 particles uniformly distributed on large-area graphene form 2D composites whose large-area character enables them to self-assemble face-to-face into orderly packed electrodes. Such regular structures form continuous and efficient transport networks, leading to outstanding lithium storage with high capacity, ultralong cycle life, and excellent rate capability--all characteristics that are ...
A practical method to determine the heating and cooling curves of x-ray tube assemblies with rotating anode x-ray tube is proposed. Available procedures to obtain these curves as described in the literature are performed during operation of the equipment, and the precision of the method depends on the knowledge of the total energy applied in the system. In the present work we describe procedure...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید