among different spd techniques, equal channel angular pressing has attracted the most attentions,because of applying large strain to solid bulk materials. in this research, ecap process up to 6passes was carried out on a pure copper and a 6012 al-mg-si alloy with bc route in ecap dieswith φ=120 and ψ=20 and diameter of 20and 10 millimeter respectively. moreover, x-raydiffraction (xrd) system wa...

Among different SPD techniques, Equal channel Angular Pressing has attracted the most attentions, because of applying large strain to solid bulk materials. In this research, ECAP process up to 6 passes was carried out on a pure copper and a 6012 Al-Mg-Si alloy with BC route in ECAP dies with Φ=120 and Ψ=20 and diameter of 20and 10 millimeter respectively. Moreover, X-ray diffraction (XRD) syste...

This study evaluated the performance of aluminum-copper alloy filtration, without the original aluminum filter, for dental radiography in terms of x-ray energy spectrum, air kerma rate and image quality. Comparisons of various thicknesses of aluminum-copper alloy in three different percentages were made with aluminum filtration. Tests were conducted on an intra-oral dental x-ray machine and wer...

nowadays, equal channel angular pressing, known as the ecap process, is one of the most popular methods for manufacturing ultra-fine grained (ufg) materials. in this paper, ecap process has been carried out on pure copper and 6012 aluminum alloy up to six passes by route . principal attention was paid to the influence of parameters such as diameter, material, and the height of billet on mechani...

Among different SPD techniques, Equal channel Angular Pressing has attracted the most attentions, because of applying large strain to solid bulk materials. In this research, ECAP process up to 6 passes was carried out on a pure copper and a 6012 Al-Mg-Si alloy with BC route in ECAP dies with Φ=120 and Ψ=20 and diameter of 20and 10 millimeter respectively. Moreover, X-ray diffraction (XRD) syste...

0261-3069/$ see front matter 2010 Elsevier Ltd. A doi:10.1016/j.matdes.2010.08.008 ⇑ Corresponding author. Address: School of Mechan ing, Nanyang Technological University, 50 Nanyang Republic of Singapore. Tel.: +65 6790 5588; fax: +65 E-mail address: [email protected] (Z.W. Zhon In this study, a rapidly solidified aluminum alloy was compared with beryllium copper and 6061 aluminum alloys in ...

in this paper, welding feasibility between aa1100, aa5050 and aa6082 aluminum alloys and a441 aisi steel by friction stir welding has been studied. mathematical analysis of the heat generation during process showed that the maximum temperature produced in aa6082 aluminum alloy and a441 aisi joint but heat distribution in aa1100 aluminum alloy was higher than the other alloys. the investigation ...

In recent year’s aluminum and aluminum alloys are widely used in automotive industries. These are light weight (density of about 2.7g/cc),having good malleability and formability, high corrosion resistance and high electrical and thermal conductivity. High machinability and workability of aluminum alloys are prone to porosity due to gases dissolved during melting processes. However, in the engi...

Nowadays, equal channel angular pressing, known as the ECAP process, is one of the most popular methods for manufacturing ultra-fine grained (UFG) materials. In this paper, Ecap process has been carried out on pure copper and 6012 aluminum alloy up to six passes by route . Principal attention was paid to the influence of parameters such as diameter, material, and the height of billet on mechani...

Nowadays, equal channel angular pressing, known as the ECAP process, is one of the most popular methods for manufacturing ultra-fine grained (UFG) materials. In this paper, Ecap process has been carried out on pure copper and 6012 aluminum alloy up to six passes by route . Principal attention was paid to the influence of parameters such as diameter, material, and the height of billet on mechani...