In this study, two new Ni/La-Al2O3 catalysts were prepared by a sol-gel method, with different aluminium precursors (aluminium triisopropoxide and aluminium nitrate). The catalysts were characterized by scanning electron microscope (SEM), X-ray fluorescence (XRF), X-ray diffraction (XRD), BET specific surface area, and particle size analysis (PSA) techniques. The BET results showed that the par...

In the current study, effect of varying Silicon Carbide particulate on the mechanical properties of Aluminium based alloy automobile brake disc component was investigated. The result of experimental investigation on mechanical properties of Silicon Carbide particle reinforced Aluminium Matrix was achieved for composite brake disc using universal tensile test machine, Rockwell hardness testing m...

In this research work the effect of internal strain on electrical tree growth has been revealed in clear polyester. Strain was introduced in the specimen by the introduction of particles like aluminium oxide, polytetroflouroethylene (PTFE) and glass beads in a clear polyester resin C. Aluminium oxide particles of size 105μm, PTFE 675μm and glass beads of 1mm were tested. These materials were em...

The discrepancy in previous reports of the action of aluminium on the lung may be explained by differences between stamped and granular aluminium powders. A stamped powder of the variety causing pulmonary fibrosis showed a brisk reaction with water, but a granular powder was unreactive. This difference is primarily due to the granular particles being covered by inert aluminium oxide, the format...

Aluminium base alloy (Al-Cu-Si) was reinforced with silicon carbide (SiC) particles, in various percentage compositions from 0-20 wt%. Silicon carbide particle size of 20µm was selected. The molten slurry of SiC reinforced base aluminium metal was casted through green and dry sand casting methods and solidification process was carried out under ambient conditions. A selected population...

The reduction of aluminium trichloride by lithium aluminium hydride in the presence of poly(vinylpyrrolidone) or poly(methylmethacrylate) in mesitylene yielded nano aluminium particles in the matrices of respective polymers. Solution phase synthesis methodology was used successfully to produce composites of various Al/polymer ratios. The composites were characterized by powder XRD patterns and ...

This work is focused on the role of intermetallics in pitting corrosion of Al2219 alloy. Second phase particles were characterized by AES, SAM and EDX. Their behaviour in a solution of NaCl was investigated as a function of exposure time. The results confirmed the cathodic nature of the intermetallics with respect to the aluminium matrix. Corrosion products rich in aluminium and oxygen were fou...

This paper presents results obtained from the grinding of aluminium-based metal matrix composites reinforced with either aluminium oxide (Al2O3) or silicon carbide (SiC) particles using grinding wheels made of SiC in a vitrified matrix or diamond in a resin-bonded matrix. The study used grinding speeds of 1100–2200 m min , a grinding depth of 15 m for rough grinding and 0.1–1 m for fine grindin...

colloids are small suspended particles in water which can not be settled or removed naturally due to their light weight and stability. these particles pose some degree of stability and cause water turbidity. there are some concerns regarding colloid removal efficiency in water treatment plants of iran. in this study, the effectiveness of aluminium sulfate and poly-aluminum chloride was evaluate...

Results: No or minor change of zeta potential and average particle size of lumogallion labelled aluminium oxyhydroxide, AlO(OH) and aluminium hydroxyphosphate, Al(OH)x(PO4)y. Both phagocytosing and non-phagocytosing leukocytes became associated with ABAs at concentrations expected after in vivo administration of a vaccine. The ABAs were relatively toxic, affecting both lymphocytes and monocytes...