in hot dip galvanizing, several parameters such as chemical composition of coating bath, immersion time and surface roughness of specimens could affect microstructure and properties of coating. in this article, the effect of aluminum content, immersion time and surface roughness on structure and properties of alloy layers have been investigated. specimens of low carbon silicon-free steel with d...

zinc coating is formed by the heterogeneous assembly of the γ, γ1, δ, ζ and η phases whose mechanicalproperties greatly differ from each other. thermal strains resulting from large differences betweenthermal expansion coefficients are partially relaxed by the formation of a crack network. in order tomodel this phenomenon, initial hardness, thermal expansion coefficient αi and toughness (kic) of...

We report the application of the technique of infrared transmission to measure the temperature of silicon wafers during the growth of silicon-germanium alloy heteroepitaxial layers in a rapid thermal processing system. The silicon-germanium alloy layers have negligible absorption at 1.3 and 1.55 pm over wide ranges of thickness, composition, and strain condition. The substantial improvement of ...

Nanometer-scale compositional structure in InAsxP12x/InNyAsxP12x2y //InP heterostructures grown by gas-source molecular beam epitaxy and in InAs12xPx/InAs12ySby/InAs heterostructures grown by metalorganic chemical vapor deposition has been characterized using cross-sectional scanning tunneling microscopy. InAsxP12x alloy layers are found to contain As-rich and P-rich clusters with boundaries fo...

OBJECTIVE The purpose of this study was to use x-ray diffraction (XRD) to obtain new information about the oxide layers on four representative oxidized high-palladium alloys. METHODS Cast specimens of two Pd-Cu-Ga alloys and two Pd-Ga alloys, with both polished and etched surfaces and air-abraded surfaces, were subjected to oxidation procedures recommended by the manufacturers. The specimens ...

The published external quantum efficiency data of the world-record CdTe solar cell suggests that the device uses bandgap engineering, most likely with a CdTexSe1-x alloy layer to increase the short-circuit current and overall device efficiency. Here atom probe tomography, transmission electron microscopy and electron beam-induced current are used to clarify the dependence of Se content on the p...

Composition modulated multilayer alloy (CMMA) coatings of Zn-Ni were electrodeposited galvanostatically on mild steel (MS) for enhanced corrosion protection using single bath technique. Successive layers of Zn-Ni alloys, having alternately different composition were obtained in nanometer scale by making the cathode current to cycle between two values, called cyclic cathode current densities (CC...

In order to broaden industrial applications of Mg alloys, as lightest-weight metal alloys in practical uses, many efforts have been dedicated to manufacture various clad sheets which can complement inherent shortcomings of Mg alloys. Here, we present a new fabrication method of Mg/Al clad sheets by bonding thin Al alloy sheet on to Mg alloy melt during strip casting. In the as-strip-cast Mg/Al ...

A nickel alloy with high chrome and molybdenum content was found to form a highly resistive and passive oxide layer. The donor density and mobility of ions in the oxide layer has been determined as a function of the electrical potential when alkaline water layers are on the alloy surface in order to account for the relative inertness of the nickel alloy in corrosive environments.

in this research, surface composite layers containing nano sized tib2, al2o3-tib2, zro2 and cnt particles have been fabricated on aluminum alloy substrates by friction stir processing. the effects of different processing variables such as number of passes and strengthening particle distribution, hardness, and wear properties of surface nanocomposite layers have been evaluated by electron micros...