The material flow and microstructural evolution in the friction stir welds of a 6061-Al alloy to itself and of a 6061-Al alloy to 2024-Al alloy plates of 12.7 mm in thickness were studied under different welding conditions. The results showed that plastic deformation, flow, and mechanical mixing of the material exhibit distinct asymmetry characteristics at both sides of the same and dissimilar ...

Cyclic stress strain curves (CSSC) response of Al-2024 Annealed condition was conducted under symmetric tension-compression at room temperature and constant frequency, using a servo-hydraulic testing machine, to study the effect of cooling rate on cyclic stress strain curves (CSSC) response. The fatigue response of Al-2024 alloy was evaluated macroscopically in terms of cyclic stress strain res...

In this paper we utilize Support Vector Machines to predict the degradation of the mechanical properties, due to surface corrosion, of the Al 2024-T3 aluminum alloy used in the aircraft industry. Precorroded surfaces from Al 2024-T3 tensile specimens for various exposure times to EXCO solution were scanned and analyzed using image processing techniques. The generated pitting morphology and indi...

In this study, mechanically alloyed Al 2024 powder is densified by conventional sintering and by equal channel angular pressing (ECAP) with and without back pressure. The powder was encapsulated in an aluminium can for consolidation through ECAP. The properties obtained in the compacts by conventional sintering route and by ECAP are compared. The effect of conventional sintering and ECAP on con...

In the present work, the tensile properties and fracture behavior of a 2024Al composite reinforced with 10 vol % SiCp and fabricated via powder thixoforming (PT) were studied at temperatures ranging from 25 ◦C to 300 ◦C with a strain rate of 0.05 s−1, as well as the PT 2024 alloy. The results indicated that the tensile strengths of both the PT materials were all decreased with increasing the te...

in this study, aluminium2024- graphite composites containing 5, 10, 15 and 20 weight percent of graphite were produced by solid assisted melt disintegration (samd) technique which resulted in production of al/gr powder mixtures which subsequently consolidated and sintered for preparation of al/gr composites. in this technique, powder mixture was prepared by addition of flake graphite (mean diam...

In this study, Aluminium2024- Graphite composites containing 5, 10, 15 and 20 weight percent of graphite were produced by solid assisted melt disintegration (SAMD) technique which resulted in production of Al/Gr powder mixtures which subsequently consolidated and sintered for preparation of Al/Gr composites. In this technique, powder mixture was prepared by addition of flake graphite (mean diam...