the steel slag is the main by-product of steel industry. the aim of this study using the steel slag as a low-cost absorbent in order to remove cadmium pollutant from industrial wastewater. some factors that affect the process of cadmium removal by steel slag such as ph, contact time, absorbent dosage and cadmium initial concentration has been studied. standard solution of synthetic wastewater i...

almcm-41 was applied for adsorption of methylene blue (mb) and auramine (au) in single and binary component systems. in the single component systems, almcm-41 represents higher adsorption capacity for mb than au with the maximal adsorption capacity of 2.07×10−4 and 1.15×10−4 mol/g at 25 ˚c for mb and au, respectively. in the binary component system, mb and au exhibit competitive adsorption onto...

in this study, nano-tio2 was employed for the adsorption of chloroform from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. the effects of ph, initial chloroform concentration and nano-tio2 dosage were also investigated. optimal conditions for chloroform removal by nano-tio2 have been then identified. results of equilibrium experiments showed that the...

in this study, bimodal meso-porous silica (uvm-7) synthesized and fabricated amino silane modified supports were characterized by powder x-ray diffraction (xrd), n2 adsorption/desorption, transmission electron microscope (tem), elemental analysis and titration. capacity of co2 capture on modified bimodal pore structure silica at 70°c was calculated using breakthrough curves; and it was found th...

in this research, adsorption of dibenzothiophene (dbt) as a model of sulfur containing material has been studied by pb exchanged y-zeolite under different experimental conditions. the adsorption was kinetically fast and high adsorption capacity was obtained. the equilibrium adsorption data were analyzed using langmuir and freunlich isotherm models. the corresponding parameters and correlation c...

batch experiments were conducted to study the adsorption behaviors of lead ion (pb2+) onto ferrihydrites prepared using three different procedures which were characterized  by textural analysis (bet). the adsorption removal of pb2+ by the three ferrihydrites (called fh-1, fh-2 and fh-3, respectively) were compared, and fh-3 shows fast adsorption kinetics as well as high adsorption capacities, t...

in the current investigation a novel nano hybrid adsorbent mcm-41/n-(3-trimethoxysilyl)-propyl)diethylenetriamine (mcm-41/tmspdeta) was prepared and was characterized using dls (dynamic light scattering), fourier transform infrared (ftir), x-ray diffraction (xrd), brunauer–emmett–teller (bet) analytical techniques and transmission electron microscopy (tem). the synthesized mcm-41/tmspdeta adsor...

the modified surface of typha latifolia l. root (mstl), as an alternative economical adsorbent, wasused for the removal of ni (ii) and cd(ii) ions from aqueous solutions. the effect of initial ph, initialconcentration of metal ion, and contact time was investigated in a batch system at room temperature.the kinetics data could be fitted well by pseudo-second-order model with correlation coeffici...

the kinetic study of methylene blue (mb) adsorption using acid-activated spent tea (aast) as an adsorbent from aqueous solution with the aim of comparing linear and non-linear regression analysis methods was performed at varying initial mb concentrations (10-100 mg/l). hence, spent tea leaves, which were activated using concentrated sulfuric acid, were prepared. the physicochemical characterist...