conclusions according to the high efficiency of cadmium elimination by tea waste, this approach is applicable as an efficient and affordable trend to remove cadmium from aqueous solution without any chemical or physical pre-treatment. background heavy metals pollution is a serious threat to environment and human health. therefore, it is vital to find an effective method to remove heavy metals f...

almcm-41 was applied for adsorption of methylene blue (mb) and auramine (au) in single and binary component systems. in the single component systems, almcm-41 represents higher adsorption capacity for mb than au with the maximal adsorption capacity of 2.07×10−4 and 1.15×10−4 mol/g at 25 ˚c for mb and au, respectively. in the binary component system, mb and au exhibit competitive adsorption onto...

background: as fluoride concentration in drinking water is one of the effective parameters in human health, finding the ways to remove excess amount of fluoride is very important in water supply projects. this study aimed to evaluate mendon bauxite mine in the removal of fluoride from drinking water. methods: this experimental study was conducted from may to october 2013 on synthetic and actual...

the objective of this study was to assess the adsorption potential of activated carbon (ac) asan adsorbent for the removal of murexide (mu) from aqueous solutions. the influence of variablesparameters including ph, amount of adsorbent, sieve size of adsorbent, temperature and contact timeon mu removal was studied. following optimization of variables, the relation between concentrations ofdye re...

the modeling of kinetic and isotherm curves acquired in adsorption of polycyclic aromatic hydrocarbons (pahs) as a model compound (phenanthrene) on activated carbons in the organic solvent. all the runs were carried out in a batch system at atmospheric pressure, process temperature of 24±2°c, and using the 100 ml phenanthrene in cyclohexan. this experimental work was mainly focused on the study...

in this study, nano-tio2 was employed for the adsorption of chloroform from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. the effects of ph, initial chloroform concentration and nano-tio2 dosage were also investigated. optimal conditions for chloroform removal by nano-tio2 have been then identified. results of equilibrium experiments showed that the...

In this work, zeolite 13X with porosity structure has been used as an adsorbent for adsorption of CO2 flue gas. The effect of operating conditions including pressure and time on adsorption capacity were investigated. The experiments conditions are constant temperature, the range of pressure 1 - 9 bar and the registration of adsorption capacity with passing of time. Experimental data were adjust...

batch experiments were conducted to study the adsorption behaviors of lead ion (pb2+) onto ferrihydrites prepared using three different procedures which were characterized  by textural analysis (bet). the adsorption removal of pb2+ by the three ferrihydrites (called fh-1, fh-2 and fh-3, respectively) were compared, and fh-3 shows fast adsorption kinetics as well as high adsorption capacities, t...

jute modified has been used for adsorption of cr (vi), cd (ii) and pb (ii) ions over a range ofinitial metal ion concentration. adsorption process is done in batch mode. adsorption isotherms ofthe heavy metals on adsorbents prepared were determined and correlated with common isothermequations. it was found that the freundlich isotherm is better than langmuir for explaining thebehavior of adsorp...