In this study, analytical models considering different material and geometry for ‎both single and double-lap bolted joints were reviewed for better understand how to ‎select the proper model for a particular application. The survey indicades that the ‎analytic models selected for the adhesively single or double bolted lap joints, as well ‎as T, scarf, and stepped joints, with linear material pr...

Article history: Received: 03.10.2014. Received in revised form: 19.12.2014. Accepted: 30.12.2014. In this work, the effect of adherend shape on the tensile strength of adhesively bonded single lap aluminum structures joint was numerically studied using three dimensional finite element models. Six joint models were investigated. In this paper, a static finite element analysis was performed in A...

In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...

With an increasing use of adhesively bonded joints in the industry, there is a correspondingly growing need for the inspection of adhered joints. It is necessary to detect defects in the adhesively bonded materials such as voids inclusions, chemical miscure of the adhesive, or delaminations of the bonded layers. In order to use an ultrasonic technique to detect these defects, a thorough underst...

The critical role played by adhesive bonds in lap joints is well known. A good knowledge of the mechanical properties of adhesive bonds in lap joints is a prerequisite to the design and reliable prediction of the performance of these bonded structures. Furthermore, the lap joint may be subject to high-temperature environments in service. Early detection of the degree of thermal degradation in a...

Three-dimensional finite element models are developed to investigate the effects of both tensile load and uniform temperature load on the stresses in hybrid joints. During the solution of the problem, finite element method (FEM) is preferred, as this method is very suitable for solving many engineering problems. An aluminum sheet is bonded a composite sheet. Hybrid joints are designed from both...

Experimental and numerical investigations were carried out on adhesively bonded full-scale double lap joints from pultruded GFRP profiles with relatively thick adhesive layers, needed in infrastructure applications to compensate for tolerances. The influence of different geometrical parameters on the joint strength was investigated, namely the thickness of the adhesive layer (from 5 to 35 mm), ...