BACKGROUND The current typical drying methods for red ginseng are sun drying and hot-air drying. The purpose of this study was to investigate drying characteristics of red ginseng by using far-infrared drying. METHODS The far-infrared drying tests on red ginseng were conducted at two drying stages: (1) high temperature for 24 h drying and (2) low temperature drying until the final moisture co...

Vacuum drying of Salicornia herbacea L. was performed at different drying temperatures (50, 60, 70, and 80°C) to evaluate the drying characteristics and the effect of drying temperatures on the quality of Salicornia. As the drying temperature increased, the drying time decreased significantly (P< 0.05). The drying rate decreased with decrease in moisture content and increase in drying time. On ...

Drying of wild pomegranate seeds was carried out by using various drying methods to evaluate the best and feasible method of drying and to produce a value added product “anardana”. The various drying methods used were vacuum drying, oven drying, sun drying, poly-tent house drying and room drying. The experimental results showed that out of all the drying methods, sun drying method for anardana ...

To establish the most convenient and effective method to dry tangerine peels, different methods (sun drying, hot-air drying, freeze drying, vacuum drying, and medium- and short-wave infrared drying) were exploited. Our results indicated that medium- and short-wave infrared drying was the best method to preserve nutraceutical components; for example, vitamin C was raised to 6.77 mg/g (D.W.) from...

To explore the collapse of eucalyptus wood cells during the drying process, continuous and intermittent drying were carried out on Eucalyptus urophylla. The shrinkage throughout the intermittent drying process was less than that of continuous drying. According to observations of cells made using scanning electron microscopy (SEM), there was a large difference in the degree of cell collapse betw...

Characteristics of microwave drying of wood strands with different initial moisture contents and geometries were investigated using a commercial 10 small microwave oven under different power inputs. Temperature and moisture changes along with the drying efficiency were examined at different drying scenar­ ios. Extractives were analyzed using gas chromatography=mass spectrometry (GC=MS). The res...

In this data article, laboratory experimental investigation results on drying kinetic properties: the drying temperature (T), drying air velocity (V) and dewatering time (Te), each of the factors has five levels, and the experiment was replicated three times and the output: drying rate and drying time obtained, were observed. The experiment was conducted at National Centre for Agricultural Mech...

The effects of slice thickness, microwave pre-treatment, and drying temperature on drying orange kumara slices were investigated. The highest drying rate, with minimal loss of colour, occurred at 80°C. Slice thickness did not significantly influence colour but drying time increased with slice thickness. The drying curves fitted the Page thin-layer drying model. Two minutes microwave pre-treatme...

Microwave drying technology has the potential for large production time and energy cost savings versus traditional vacuum drying methods for active pharmaceutical ingredient (API) applications. One of the most critical parameters in the drying process is the determination of the end point, usually at a specified moisture content. On-line mass spectrometry (MS) was used as a tool to monitor micr...

Multistage heat pump drying of macadamia nut under modified atmosphere was studied to improve the drying process and quality of the nuts. Conditions of study included drying temperature of 40-60°C, using nitrogen and normal air as drying medium. Drying kinetics and quality of nuts (moisture content, aw, rancidity and colour) as well as energy consumption of all drying processes were examined. T...