the effect of pre-existing nano sized precipitates on the mechanisms and rate of grain refinement has been investigated during the severe plastic deformation. a binary al–0.2sc alloy, containing coherent al3sc particles, of 3.62 nm in diameter has been deformed by accumulative roll bonding up to 10 cycles. the resulting deformed structures were quantitatively analyzed using electron backscatter...

In this paper, an extended accumulative roll bonding (ARB) technique, called the 'Four-Layer Accumulative Roll Bonding (FL-ARB)' technique, is presented for the first time. This technique has been employed to produce ultrafine-grained commercial pure aluminum sheets with success. After three FL-ARB passes, the grain size of pure aluminum was seen to reduce to 380 nm. The bonding strength of the...

In this paper, the study of efficient bonding characteristics of AA6014 and AA1050 metal strips is carried out for Accumulative Roll Bonding (ARB) process. Among various Severe Plastic Deformation (SPD) techniques, ARB process is widely used due to its ability to produce ultra-fine grained ( UFG) or nanostructured bulk material. It has been observed that, if the experimental pressure and corres...

The effect of pre-existing nano sized precipitates on the mechanisms and rate of grain refinement has been investigated during the severe plastic deformation. A binary Al–0.2Sc alloy, containing coherent Al3Sc particles, of 3.62 nm in diameter has been deformed by accumulative roll bonding up to 10 cycles. The resulting deformed structures were quantitatively analyzed using electron backscatter...

in this study, al/al2o3 composites with two different particle sizes of 1 µm and 0.3 µm were produced via accumulative roll bonding (arb). the microstructure evolution, mechanical properties and fracture behavior of the composites were investigated. results show that higher arb cycles are required to achieve a uniform distribution of particles in the composite with 0.3 µm particle size. during ...

The accumulative roll bonding (ARB) as a severe plastic deformation (SPD) procedure aimed at enhancing the mechanical properties of metals and alloys. In the present study, a new slab method is proposed for estimating the forming stress field for cold extrusion of metals cross the alumina interlayer powder particles by accumulative roll bonding process. Plastic deformation behavior of the metal...

Accumulative roll-bonding process (ARB) is an important severe plastic deformation technique for production of the ultrafine grained, nanostructured and nanocomposite materials in the form of plates and sheets. In the present work, this process used for manufacturing Al/SiO 2 nanocomposites by using Aluminum 1050 alloy sheets and nano sized SiO 2 particles, at ambient temperature. After 8 cycle...

In this research, variant selection of martensite transformed from ultrafine-grained (UFG) austenite fabricated by accumulative roll bonding (ARB) process and subsequent annealing was investigated with respect tomorphology of parentaustenitic phase. The results show that the original shape of austenite grain is very effective factor in determiningthe preferred variants of martensite transformed...

The accumulative roll bonding (ARB) as a severe plastic deformation (SPD) procedure aimed at enhancing the mechanical properties of metals and alloys. In the present study, a new slab method is proposed for estimating the forming stress field for cold extrusion of metals cross the alumina interlayer powder particles by accumulative roll bonding process. Plastic deformation behavior of the metal...