outdoor experiments on a once-through single glazed solar air heater with perforated metal absorber plate were conducted to determine the practical effect of absorber plate porosity as well as suction air flow rate on the collector thermal efficiency and its total pressure drop. three aluminum absorber plates were made perforated by drilling circular holes with different diameter/pitch ratios i...

In this paper, the possible realization of the electromagnetic (EM) absorber as a thin metasurface is considered. The metasurface is based on establishing a passive surface of electric and magnetic currents using the Huygen’s principle. So, the absorber is named Huygens Absorber (HA). The metasurface can be designed using split meander lines with spiral rings. In this way, both sides of the sub...

Micro-perforated absorber is a newly developed sound absorber, and it has a number of attractive features: • Unlike conventional perforated absorbers, micro-perforated absorber can be made from transparent materials like plastic glass. • Unlike commonly used fibrous absorptive materials, micro-perforated absorber is fibrous-free and thus, there is no health concern. • Micro-perforated membranes...

A broadband Circuit Analogue (CA) absorber using double-circular-loop array is investigated in this paper. A simple equivalent circuit model is presented to accurately analyze this CA absorber. The circuit simulation of the proposed model agrees well with full-wave simulations. Optimization based the equivalent circuit model, is applied to design a single-layer circuit analogue absorber using d...

As novel absorber materials are developed and screened for their photovoltaic (PV) properties, the challenge remains to reproducibly test promising candidates for high-performing PV devices. Many early-stage devices are prone to device shunting due to pinholes in the absorber layer, producing "false-negative" results. Here, we demonstrate a device engineering solution toward a robust device arc...

A novel design of metamaterial (MTM) based absorber with reduced cell size is proposed in this paper. The absorber is designed to operate in the mid infrared (IR) regime using gold nano-pillar inclusions embedded in a dielectric spacer. The absorption band can be controlled by adjusting the nano-pillar’s properties. Numerical simulations have been conducted to investigate the effect of these in...

in this research a flat plate solar air collector was investigated under direct solar radiation consisted of a slatted glass cover, perforated absorber aluminum sheets (porosity 0.0177, 0.0314 and absorber thickness of 2.5 mm). the effect of porosity on absorber efficiency of collector was evaluated. six levels of air mass flow rates (0.0056 to 0.0385 kg m-2 s-1) were adopted.average solar ener...

The red quasar 3C212 (z = 1.049) is one of the most distant and most luminous AGN which has shown evidence of an X-ray warm absorber. In order to further investigate this unusual quasar, we used Chandra/ACIS-S to observe 3C212 for 19.5 ksec, resulting in a net detection of ∼ 4000 counts. The Chandra data confirm the presence of an excess absorbing column NH ≈ 4 × 10 21 cm at the quasar redshift...

This work reports plasmon enhanced photoacoustic generation by using a three dimensional plasmonic absorber. The 3D plasmonic absorber comprises a thin polymer film on glass nanopillar arrays with nanogap-rich silver nanoislands. The 3D plasmonic absorber clearly shows 24.6 times higher enhancement of photoacoustic signals at an excitation wavelength of 630 nm than a simple polymeric absorber. ...

The acoustic properties of a compound micro-perforated panel (MPP) absorber array are investigated. The absorber array consists of three parallel-arranged MPP absorbers with different cavity depths. A finite element procedure is used to simulate its acoustic behaviors under normal incidence. Experimental studies are carried out to verify the numerical simulations. Due to different reactance mat...