In this study, property criteria for automotive Al-Mg-Si sheet alloys are outlined and investigated in the context of commercial alloys AA6016, AA6005A, AA6063 and AA6013. The parameters crucial to predicting forming behavior were determined by tensile tests, bending tests, cross-die tests, hole-expansion tests and forming limit curve analysis in the pre-aged temper after various storage period...

Abstract The present investigation aimed to determine the optimal parameters for wire-cut electrical discharge machining (WEDM) stir cast aluminum alloy AA6063 at 850°C reinforced with 10 wt.% green SiC (SiC g ) and black b particles. WEDM parameters, such as pulse on time ( T ON ), wire feed (WF) rate, flushing pressure (FP) of resultant AA6063/SiC composites, were optimized using Taguchi meth...

In this investigation, the effect of friction stir processing (FSP) parameters such as rotational speed, traverse speed and plunge depth on the tensile strength of AA6063 aluminum alloy was studied. The experiments were carried out as per response surface methodology parametric design concepts to study the influence of various combinations of process parameters. Statistical optimization techniq...

Effect of temperature on formability of AA6063 aluminum tubes in incremental forming process was investigated. Experiments are performed on AA6063 aluminum tubes. A spirally moving tool incrementally expands the tube wall. The tube is clamped from both ends while the deformation zone is not in contact with the die. A circumferential heating system is used to heat the tube due to the low formabi...

The occurrence of grain boundary precipitates was investigated with respect to the crystallographic orientation adjacent grains in extruded AA6110, AA6063 and AA6061 alloys brought T6 temper. It found that requirement for precipitate formation is have <100>Al directions or {100}Al planes parallel plane. highest density present when this fulfilled by both grains.

In this study; The properties of billets 3 different diameters AA6063 and AA6951 aluminum alloys were investigated by trying methods. line with study, the comparing casting homogenization parameters sizes. metallographic mechanical analyzes samples made presented in tables. Casting providing most suitable parameter determined according to values.

The AA6063 aluminium alloy has gained widespread use in manufacturing the light-weighted structures which requires a high strength to weight ratio, and it possesses an excellent corrosive resistance T6 heat-treated (solution heat treated artificially aged) condition. process of friction stir welding (FSW) is emerging joining solid state that does not melt recast material being welded, as oppose...

Extrusion profiles are extensively used in industries and any improvement the process could potentially have a large impact on energy cost savings. In this study, novel extrusion method, namely multi-container extrusion, was proposed for producing thin-walled wide aluminium components with low force. Its basic principle is to enable multiple billets be welded forced through die orifice simultan...

Surface quality and dimensional precision will greatly affect parts during their useful life especially in cases where the components will be in direct contact with other elements during their application. This paper deals with three soft computing techniques namely Adaptive Neuro Fuzzy Inference System (ANFIS), Neural Networks (NN) and regression in predicting the surface roughness in turning ...