the properties of alkaline sulfite anthraquinone (as/aq) pulp from old corrugated container (occ)was studied. in each trial 100 grams (based on dry weigth) of occ and 18% active alkali was used.three levels of anthraquinone (0.0.1 and 0.2% based on dry weigth of the occ) and two pulpingtimes (120 and 150 minutes at maximum pulping temperature) were applied. pulping temperature,na2so3/naoh ratio...

soda and soda-aq pulping of corn stalk applying different charges of active alkali and pulping time was studied. the average value of fiber length, diameter and cell wall thickness were measured as 1.03 mm, 23.64 µm and 5.26 µm, respectively. the content of alcohol-acetone extractives, cellulose, lignin, extractives soluble in 1% naoh and ash content of corn stalk were determined as 15%, 51.2%,...

the present research has been conducted to investigate the soda and soda-anthraquiuone pulping from whole kenaf (v36). in this respect, anatomical characteristics of kenaf bast and core fibers as well as the soda and soda-aq pulp properties produced at four sodium hydroxide concentrations, namely 25, 30, 35 and 40 (g/lit), have been evaluated. the pulping results indicated that pulp yield and k...

Hibiscus cannabinus, Cannabis sativa, and Hibiscus sabdariffa, fast growing productive annual plants, could provide fiber necessary to partially alleviate the world’s fiber deficit. The present study aimed at producing high yield pulp and the best mechanical strength properties with minimum impact on environment by SAS-AQ, and NSSC-AQ pulping processes. A total alkali of 13% (as Na2O), an alkal...

The fate of lipophilic extractives from several nonwoody species (flax, hemp, sisal and abaca) used for the manufacturing of cellulose pulps, was studied during soda/anthraquinone (AQ) pulping and totally chorine free (TCF) and elemental chlorine free (ECF) bleaching. With this purpose, the lipophilic extracts from the raw materials and their unbleached and bleached industrial pulps, were analy...

Sugarcane bagasse was delignified with alkali and peracetic acid in a two-stage process to obtain pulps with high yield and low kappa number. The experimental results indicated that alkali pretreatment prior to peracetic acid (PAA) delignification could significantly reduce PAA loading by partially removing lignin and swelling the fibers. An optimum condition for the two-stage delignification w...

Canola straw can be used as a raw material for the production of chemimechanical pulp (CMP). In this work, chemimechanical pulp was first produced from canola straw, and then the bleaching performance of the produced chemimechanical pulp was investigated under different conditions (dosages of NaOH and Na2SO3, time, and temperature). The results showed that the yield of chemical pretreatment in ...

colloidal nanosilica is currently being produced by various methods which are mainly high energy intensive and/or not environmentally friendly. it is therefore essential to develop new energy-efficient and environmentally friendly technologies. this paper introduces a new ultrasound assisted route based on alkali leaching of silica fume for synthesis of colloidal silica nanoparticles. the ef...

Rice straw was cooked with three levels of alkali content (12, 14 and 16%) in cooking liquor by soda-organosolv (ethanol, diethylene glycol, dimethyl formamide) process. The effect of alkali addition on yield, kappa number, brightness and viscosity of organosolv unbleached pulps was studied. The TCF bleachability of these organosolv pulps and kraft pulp was carried out using a simple three stag...

in this study, the main papermaking characteristics of soybean straw (glycine max) as an agricultural residue were investigated. the fiber biometry and chemical composition of soybean straw were determined. the properties of pulps from soda, soda-aq and monoethanolamine (mea) processes were compared. the average fiber length, fiber diameter, lumen diameter, and cell wall thickness were found to...