نتایج جستجو برای: 1 and 2 wt% nps. fe
تعداد نتایج: 17518846 فیلتر نتایج به سال:
because most contaminants in water create strong interactions with hydrophobic surfaces, there are usually problems such as flux decline and pore blocking in polyethylene (pe) membranes due to irreversible adsorption of foulants on their intrinsic hydrophobic surface. therefore, in this work, attempts were made to improve the properties of pe membranes in terms of water flux and membrane foulin...
in this project, 4,4?-methylenebis(3-chloro-2,6-diethyl trimellitimidobenzene) as a diacid, was prepared by the reaction of trimellitic anhydride (tma) with 4,4?-methylenebis(3-chloro-2,6-diethylaniline) (mcdea). the novel poly(amide-imide) (pai) was synthesized from the reaction of 4,4?-methylenebis(3-chloro-2,6-diethyl trimellitimidobenzene) as a diacid with mcdea under green condition using ...
Ferromagnetic carbon-coated Fe nanoparticles (core size of 15 nm, saturated magnetization of Ms=218 emu g(-1) and coercivity of Hc=62 Oe), fabricated at a mild temperature, demonstrate a strong ability to effectively remove more than 95 wt% of Cr(VI) in waste water via carbon shell physical adsorption, which is much higher than the commercially available Fe NPs.
Abstract:In recent years, there have been many attempts to improve the properties of dental amalgam. The aim of the present investigation was fabrication and characterization of dental amalgams containing TiO2 nanoparticles and evaluation of their compressive strength, antibacterial and corrosion behavior. In this experimental research, TiO2 nanoparticles (TiO2 NPs) were added to reference amal...
measurements of pb, cu, zn, as, ni, hg, and fe heavy metals and major elements and components such as ca, hco3, so4, na, k, mg and cl in soluble rain fractions were performed on rainwater collected at arak plain during the rainy seasons of 2012. concentrations of the heavy metals in the soluble fractions decreased for fe, pb, zn, ni, cu, as and hg, respectively and the major elements and compon...
سه سری نانوکامپوزیت مخلوط اکسید fe و si شامل fe2o3-sio2 با fe % wt 2 (1)، fe2o3-sio2 با fe % wt 35/4 (2) و fe2o3-sio2 با fe % wt 6/9 (3) با روش سل- ژل تهیه شدند و توسط آنالیز عنصری، طیف بینی ft-ir، xrd، bet و sem شناسایی شدند. این نانوکامپوزیت ها در اکسایش آلکن ها و الکل ها توسط هیدروژن پرکسید به عنوان اکسنده فعال بودند. اکسایش آلکن های خطی، حلقوی و آریل آلکن ها بررسی شد و درصد تبدیل در گستره ی...
Small Fe–Cu nanoparticles (NPs) (about 1 nm) supported at a high loading (over 10 wt %) on N-doped graphitic carbon have been prepared in single pyrolytic step from chitosan adsorbing Cu2+ and Fe2+ salts. The presence of N atoms appears to be crucial the formation small-sized metallic NPs. Interactions between Fe Cu are reflected by shift binding energy higher (Fe) or lower (Cu) values H2 therm...
Detecting aggregated amyloid peptides (Abeta plaques) presents targets for developing biomarkers of Alzheimer's disease (AD). Polymeric n-butyl-2-cyanoacrylate (PBCA) nanoparticles (NPs) were encapsulated with radiolabelled amyloid affinity (125)I-clioquinol (CQ, 5-chloro-7-iodo-8-hydroxyquinoline) as in vivo probes. (125)I-CQ-PBCA NPs crossed the BBB (2.3 +/- 0.9 ID/g) (P < .05) in the WT mous...
Herein, the removal of methyl orange (MO), a monoazo dye, from aqueous solutions was investigated using bimetallic ferromagnetic Fe/Ni nanoparticles (NPs) with the average particle size of 12-16 nm. The effect of contact time, pH, temperature, and Fe/Ni dosage on dye removal process was investigated. The results showed that 60 mg of Fe/Ni NPs at 25 oC and pH= 1 can remove 99.5% of 50 mg/L dye s...
The SiO2 supported cobalt-iron nano catalysts were prepared by the sol-gel method. This research investigated the effects of (Co/Fe) wt.%, different Co/Fe ratio at different temperature and loading of KCl wt.% for Fisher-Tropsch synthesis (FTS). The results were showed that the catalyst containing 50 wt.% (Co/Fe)/SiO2 (Co/Fe ratio is 70/30) which promoted with 0.6 wt.% KCl is an optimal nano ca...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید