in this paper, the problem of calculating the stress intensity factor (sif) for an orthotropic thick-walled cylinder with a small radial crack subject to internal pressure is considered. the crack is assumed to be an edge crack on the external radius of the cylinder. the stress intensity factor is calculated by superposition of an uncracked cylinder with uniform stress distribution and a cylind...

In this paper, the problem of calculating the stress intensity factor (SIF) for an orthotropic thick-walled cylinder with a small radial crack subject to internal pressure is considered. The crack is assumed to be an edge crack on the external radius of the cylinder. The stress intensity factor is calculated by superposition of an uncracked cylinder with uniform stress distribution and a cylind...

A thorough examination of the quasi-static penetration of a floating elastic-brittle plate via a fracture mechanics approach has been presented by Bažant and Kim. Bažant and Kim reach the conclusion that there is a size effect (in terms of the plate thickness, h). A few of the assumptions made by these authors will be examined in this discussion. The formulation presented by Bažant and Kim assu...

We seek a non-destructive testing method to detect a radial surface breaking crack in a two-dimensional circular disk. The detection method utilizes steady-state electrical boundary measurements. A nonlinear function which characterizes the size and the location of a radial surface crack is constructed based on the knowledge of two data readings of the boundary voltage intensity corresponding t...

In this letter, the quantity effect of radial cracks on the cracking propagation behavior as well as the circular crack generation on the impacted glass plate within the sandwiched glass sheets are experimentally investigated via high-speed photography system. Results show that the radial crack velocity on the backing glass layer decreases with the crack number under the same impact conditions ...

The Interaction of a crack with rigid circular cylindrical inclusions is considered for the case of longitudinal shear deformation. General representations of the solutions for a radial crack near a single and midway between two inclusions are given. The particular case of uniform shearing stress applied at infinity is discussed in detail. Expressions for the crack tip stress intensity factor K...

The aim of the study was to find the optimum combination of materials and thicknesses to provide a tough, damage resistant multi-layer system with numerical methods to restore the damaged teeth. Extended Finite Element Method (XFEM) was used to assess the critical loads for the onset of damage modes such as radial cracks and plastic deformation in dental prostheses, which consist of a brittle o...

Crack propagation during the indentation test of a ferroelectric single crystal is simulated using a phase-field model. This model is based on variational formulations of brittle crack propagation and domain evolution in ferroelectric materials. Due to the high compressive stresses near the indenter contact faces, a modified regularized formulation of the variational brittle fracture is coupled...

This paper describes fractographic features observed in aerospace composites failed under tensile loads. Unidirectional Carbon Fibre Reinforced Plastic (UD CFRP) and Unidirectional Glass Fibre Reinforced Plastic (UD GFRP) composite specimens were fabricated and tested in tension. The morphology of fractured surfaces was studied at various locations to identify failure mechanism and characterist...

This article focused on the stress analysis of an edge crack in a thin hallow rotating functionally graded material (FGM) disk. The disk is assumed to be isotropic with exponentially varying elastic modulus in the radial direction. A comprehensive study is carried out for various combinations of the crack length and orientation with the different gradation of materials. The effect of non-unifor...