نتایج جستجو برای: سوپرآلیاژ (617 Inconel)
تعداد نتایج: 4730 فیلتر نتایج به سال:
در این تحقیق از روش آسیاکاری مکانیکی برای ایجاد پوشش Ni-Al بر سطح سوپرآلیاژ پایه نیکلی(617 Inconel) استفاده‌شده است. در این روش بمنظور تشکیل پوشش، پودر Al و زیرلایه(617 Inconel) همراه با گلولههای با قطرهای متفاوت و نسبت وزنی گلوله به پودر متفاوت درون محفظه دستگاه آسیای سیارهای قرار گرفتند و عملیات آسیاکاری در زمانهای 5 و 10 و 15 و 20 ساعت انجام شد. در حین انجام فرآیند آسیاکاری در اثر برخورد...
the current work was carried out to characterize welding of aisi 310 austenitic stainless steel to inconel 657 nickel-chromium superalloy. the welds were produced using four types of filler materials; the nickel-based corresponding to inconel 82, inconel a, inconel 617 and austenitic stainless steels 310. of the two joints involved, this paper describes the choice of welding consumables for the...
The current work was carried out to characterize welding of AISI 310 austenitic stainless steel to Inconel 657 nickel-chromium superalloy. The welds were produced using four types of filler materials; the nickel-based corresponding to Inconel 82, Inconel A, Inconel 617 and austenitic stainless steels 310. Of the two joints involved, this paper describes the choice of welding consumables for the...
Abstract: The investigation is carried out to characterize welding of AISI 310 austenitic stainless steel to Inconel 657 nickel-chromium superalloy. The welds were produced using four types of filler materials: the nickel-based corresponding to Inconel 82, Inconel A, Inconel 617 and austenitic stainless steel 310. This paper describes the effects of aging treatment on the joint. The compara...
In this study, Inconel 617 alloy was welded to A387-Gr.11 low-alloy steel using ER309L filler metal via gas tungsten arc welding (GTAW). First, the corrosion behavior of Inconel 617, A387-Gr, and the weld metal was evaluated by the Tafel polarization test and electrochemical impedance spectroscopy (EIS) in acidic (H2SO4), neutral (NaCl), and combined (H2SO4 + NaCl) solution at ambient temperatu...
In this study, Inconel 617 alloy was welded to A387-Gr.11 low-alloy steel using ER309L filler metal via gas tungsten arc welding (GTAW). First, the corrosion behavior of Inconel 617, A387-Gr, and the weld metal was evaluated by the Tafel polarization test and electrochemical impedance spectroscopy (EIS) in acidic (H2SO4), neutral (NaCl), and combined (H2SO4 + NaCl) solution at ambient temperatu...
the aim of this paper is to characterize welding of aisi 310 austenitic stainless steel to inconel 657 for use in oil-refining industries. the welds were produced using four types of filler materials; nickel-based alloys designated as inconel 82, a, 617, and 310 ss. the interfaces and heat-affected zones were characterized by optical and scanning electron microscopy. interfaces on the two sides...
Abstract The thermal analysis is performed on a heated Inconel 617 honeycomb-core sandwich panel. Sandwich panel is supported at its four edges with spar-like sub-structures that acted as heat sinks, which are generally not considered in the classical analysis. One side of the panel is subjected to a heat flux on the surface. Two types of surface heating were considered: (1) hexagonal honeycomb...
The aim of this paper is to characterize welding of AISI 310 austenitic stainless steel to Inconel 657 for use in oil-refining industries. The welds were produced using four types of filler materials; nickel-based alloys designated as Inconel 82, A, 617, and 310 SS. The interfaces and heat-affected zones were characterized by optical and scanning electron microscopy. Interfaces on the two sides...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید