In this study, the least square method is applied to study the laminar flow, heat transfer and microrotation of MgO-Ag/water micropolar hybrid nanofluid in a permeable channel. The bottom wall is hot and coolant fluid is injected into the channel from the top wall. The base fluid in the channel is water and volume fraction of nanoparticle (50% Ag and 50% MgO by volume) is between 0 and 0.02. By...

A proper understanding of reservoir fluid phase behavior is the first crucial step in the development and production of an oil/gas field. This paper addresses the challenges and errors associated with the fluid sampling that may arise before, during and after the sampling operation. For this aim, DST and PVT data of exploration and production wells of a supergiant offshore gas condensate reserv...

an experimental and theoretical energy and exergy analysis was conducted for a cylindrical cavity receiver employed in a parabolic dish collector. based on simultaneous energy and exergy analysis, the receiver average wall temperature and overall heat transfer coefficient were determined. a simplified nusselt number for heat transfer fluid (htf) through the receiver as a function of reynolds an...

In the present research, the laminar forced convective heat transfer and fluid flow characteristics for Al2O3-water nanofluid flowing in different bend (i.e., 180o and 90o) pipes have been investigated numerically in a three-dimensional computational domain using the finite volume technique. The effects of different pertinent parameters, such as the Reynolds number of the duct, volume fraction ...

mixed convection of al 2 o 3 -water nanofluid in a square microcavity is investigated numerically. governing equations are discretized and solved using the finite volume method and simpler algorithm. the knudsen number is selected between 0.001 and 0.1 to consider slip velocity and the jump temperature boundary conditions. results showed that nusselt number is a function of richardson number, k...

In this paper, the nonlinear vibrations analysis of functionally graded (FG) rectangular plate in contact with fluid are investigated analytically using first order shear deformation theory (FSDT). The pressure exerted on the free surface of the plate by the fluid is calculated using the velocity potential function and the Bernoulli equation. With the aid of von Karman nonlinearity strain-displ...

Melt flow in continuous casting tundishes is normal[y characterized by a combined model. The model is used to analyze the residence time disttibution of fluid in a tundish, In this model, the fluid volume in tundish is considered to be consisting of the plug flow, well-mixed flow, and dead volumes. Although this model was proposed over 20 years ago, most researchers have either used it incorrec...

Breaking wave impacts on a monopile at 20 m depth are computed with a VOF (Volume Of Fluid) method. The impacting waves are generated by the second-order focused wave group technique, to obtain waves that break at the position of the monopile. The subsequent impact from the vertical run-up flow on a horizontal inspection platform is computed for five different platform levels. The computational...