The term Nanofluids was first coined by Sir Stephen Choi in 1995 at Argonne National Laboratory ,U.S.A .Since the discovery, nanofluid have been explored as heat transfer fluids. Nanofluids increased the thermal conductivity of existing coolants (Water, Ethylene glycol) by a magnitude of hundred times which made them attractive for miniaturization of electronic devices .From 1995 till 2008 nano...

The present work is an experimental study of steady state convective heat transfer of de-ionized water with a (0.04% by volume) volume fraction of Al2O3 nanoparticles dispersed to form a nanofluid that flows through an aluminium tube.Laminar fully developed flow heat transfer coefficient of Al2O3 nanoparticles are dispersed in water in circular tube is discussed in this paper. In order to valid...

Abstract— The flow past an infinite vertical isothermal plate started impulsively in its own plane in a viscous incompressible two-phase nanofluid has been considered by taking into account the viscous dissipative heat. Two nano particles Copper (Cu) and Alumina (Al2O3) are submerged in a base fluid, Water (H20). The coupled non-linear partial differential equations which govern the flow are so...

This paper reports experimental investigations on the droplet formation of deionized water and a nanofluid in a heat-induced microfluidic flow focusing device. Besides the effect of temperature, the effects of nanoparticle suspension (nanofluid), and the flow rate of aqueous fluid on the droplet formation and size manipulation were studied. At constant flow rates of the two liquids, three diffe...

Interfacial tension and viscosity of a liquid play an important role in microfluidic systems. In this study, temperature dependence of surface tension, interfacial tension and viscosity of a nanofluid are investigated for its applicability in droplet-based microfluidics. Experimental results show that nanofluid having TiO2 nanoparticles of 15 nm diameters in deionized water exhibit substantiall...

The CFD simulation of heat transfer characteristics of a nanofluid in a circular tube under constant heat flux was considered using Fluent software (version 6.3.26) in the laminar flow. Al2O3 nanoparticles in water with concentrations of 0.5%, 1.0%, 1.5%, 2% and 2.5% were used in this simulation. All of the thermo-physical properties of nanofluids were assumed to be temperature independent. Two...

Nowadays external magnetic fields are capable of setting the thermal and physical properties of magnetic-nanofluids and regulate the flow and heat transfer characteristics. The strength of the applied magnetic field affects the thermal conductivity of magnetic nanofluids and makes it aeolotropic. With this incentive, we investigate the flow and heat transfer of electrically conducting liquid fi...

Heat transfer improvement in circular pipe by using nanofluid and twisted tape is presented in this review paper. Experimental and numerical studies are incorporated involving both the range of turbulent and laminar flow. Effect of type and volume fraction of nanofluid on performance of heat transfer was referred along with the length and twist ratio of the tape through the pipe on heat transfe...

Experimental investigations of heat transfer coefficient of CuO/Water nanofluid are reported in this paper. The heat transfer coefficient of the CuO/water was measured with the help of double pipe heat exchanger. The nanofluid was prepared by dispersing a CuOnano particle in deionized water. CuO/water nanofluid with a nominal diameter of 27nm at different volume concentrations (0.1 &0.3 vol.%) ...

A two-phase flow experiment using air and water-based γ-Al2O3 nanofluid was conducted to observe the basic hydraulic phenomenon of nanofluids. The local two-phase flow parameters were measured with a conductivity double-sensor two-phase void meter. The void fraction, interfacial velocity, interfacial area concentration, and mean bubble diameter were evaluated, and all of those results using the...