Transmission loss and noise reduction of reactive mufflers are determined by linear acoustic theory and unsteady flow field study, respectively. The effects of extending the inlet tube of the muffler, adding holes to the extension, and the number of holes on both transmission loss and noise reduction are investigated. In noise reduction analysis, the Navier-Stokes equations and k-ε model are us...

The effect of tube diameter on two-phase flow patterns was investigated in circular tubes with inner diameters of 0.6, 1.2, 1.7, 2.6, and 3.4mm using air and water. The gas and liquid superficial velocity ranges were 0.01–50 and 0.01–3m/s, respectively. The gas and liquid flow rates were measured and the two-phase flow pattern images were recorded using high-speed CMOS camera. The flow patterns...

Single staggered is a design development of normal wire and tube heat exchanger that wires are welded with staggered configuration on two sides. Capacity of wire and tube heat exchanger is the ability of the heat exchanger to release heat. The objective of this study is to analyse the effect of wire pitch (pw) on capacity of single staggered wire and tube heat exchanger. The research...

BACKGROUND The purpose of this study was to assess specific vacuum-venipuncture skills and the influence of the time involved in skin puncture and blood collection. METHODS Thirty subjects undergoing venipuncture in which video analysis was possible were included. These procedures were carried out by four nurses and recorded with a digital camera. Venipuncture skills classified by our observa...

In this paper, overall heat transfer coefficient and friction factor of water based γ-Al2O3 nanofluid in a double tube counter flow heat exchanger have been measured experimentally under turbulent flow condition. For better dispersion of γ-Al2O3 nanoparticles in distilled water, magnetic stirrer and ultrasonic vibrator (with a power of 240 kW and frequency of 35 kHz) were implemented. The stabi...

In this study, the effect of the tube material on the thermal stress generated in a vertical shell and tube heat exchanger is investigated. Shell and tube heat exchangers are the most common heat exchangers used in industries. One of the most common failures in these exchangers in the industry is the tube failure at the junction of the tube to tubesheet. When the shell side and the tube side fl...

The streaming potentials generated by the flow of both liquid and gas through either a Pyrex capillary tube or else an unconsolidated Pyrex porous medium were investigated. This mixture of distilled water plus nitrogen gas simulated wet steam but allowed experiments to be run at room temperature. Single-phase flow of distilled water alone resulted in a constant voltage-to-pressure drop ratio, W...

An experimental investigation has been carried out to study the turbulent flow heat transfer and to determine the pressure drop characteristics of air, flowing through a tube with insert. An insert of special geometry is used inside the tube. The test section is electrically heated, and air is allowed to flow as the working fluid through the tube by means of a blower. Air velocity, air inlet an...

In this work, we studied a pressure-driven flow of a magnetorheological suspension through a cylindrical tube in the presence of a non-uniform magnetic field perpendicular to the tube and varying along its axis. The flow was realized with the help of a commercial capillary rheometer in a controlled-velocity mode. Experimental pressure-flow rate curves exhibited a local minimum, and flow instabi...