The vertically oriented anatase single crystalline TiO2 nanostructure arrays (TNAs) consisting of TiO2 truncated octahedrons with exposed {001} facets or hierarchical TiO2 nanotubes (HNTs) consisting of numerous nanocrystals on Ti-foil substrate were synthesized via a two-step hydrothermal growth process. The first step hydrothermal reaction of Ti foil and NaOH leads to the formation of H-titan...

this study reports the fabrication of n-tio2/p-si hetrojunction by deposition of tio2nanowires on p-si substrate. the effect of system pressure and the current-voltage (i-v) characteristics of n-tio2/p-si hetrojunction were studied. the morphology of the samples was investigated by field emission scanning electron microscopy (fesem) which confirms formation of tio2 nanowires that their diameter...

BACKGROUND In this study, concrete application as a substrate for TiO2 nano powder immobilization in heterogeneous photocatalytic process was evaluated. TiO2 immobilization on the pervious concrete surface was done by different procedures containing slurry method (SM), cement mixed method (CMM) and different concrete sealer formulations. Irradiation of TiO2 was prepared by UV-A and UV-C lamps. ...

Nanosized titanium dioxide (TiO2) in its anatase form is the most frequently studied and as well as used photocatalyst. There are several syntheses procedures which enable to achieve photocatalytic TiO2. The solgel method utilizing titanium alkoxides is used most often. Alternative precursors such as titanium tetrachloride and titanyl sulphate are also frequently employed. Nowadays the environm...

TiO2 films were grown on silicon substrates by atomic layer deposition (ALD) using tetrakis-dimethylamino titanium and ozone. Amorphous TiO2 film was deposited at a low substrate temperature of 165°C, and anatase TiO2 film was grown at 250°C. The amorphous TiO2 film crystallizes to anatase TiO2 phase with annealing temperature ranged from 300°C to 1,100°C in N2 atmosphere, while the anatase TiO...

A novel attosecond multilayer mirror was designed at “water-window” wavelengths (from 2.33 nm to 4.36 nm) using a combination of TiO2 and ZnO, because both rutile TiO2 and wurtzite ZnO can be grown epitaxially together on the same c-plane sapphire substrate in spite of the different crystal structures of the molecule hexagonal units of rutile TiO2, wurtzite ZnO and sapphire. The theoretical cal...

In this paper, we report the fabrication and photoelectric properties of CdTe/TiO2 nanocrystal multilayer. Negatively charged CdTe nanocrystal hydrosols were synthesized in the aqueous phase with 3-mercaptopropionic acid as a surface modifier. The characterization of transmission electron microscopy (TEM) and UV-visible absorption spectrum indicates the resultant CdTe nanocrystal hydrosols are ...

In this research work, airplane grade aluminum alloy substrate was coated by Al2O3/ TiO2 ceramic coatings in two different compositions as 50:50 and 87:13 using Flame spraying technique. The surface & cross-sectional morphological characterizations of the Al2O3/ TiO2 powders and coatings were performed by scanning electron microscopy (SEM). The microwave absorbing properties of coatings were ex...

Titanium dioxide (TiO2) is an attractive anode material for energy storage devices due to its low-volume-change and high safety. However, TiO2 anodes usually suffer from poor electrical and ionic conductivity, thus causing dramatic degradation of electrochemical performance at rapid charge/discharge rates, which has hindered its use in energy storage devices. Here, we present a novel strategy t...

In the present work, dye-sensitized solar cells (DSSCs) were fabricated by incorporating transparent electrodes of ordered free-standing TiO2 nanotube (TNT) arrays with both ends open transferred onto fluorine-doped tin oxide (FTO) conductive glass. The high-quality TiO2 membranes used here were obtained by a self-detaching technique, with the superiorities of facile but reliable procedures. Af...