A comprehensive computational study was undertaken to identify the extent to which elastoplastic properties of ductile materials could be determined from instrumented sharp indentation and to quantify the sensitivity of such extracted properties to variations in the measured indentation data. Large deformation finite element computations were carried out for 76 different combinations of elasto-...

It is generally accepted that the fatigue crack growth (FCG) depends mainly on the stress intensity factor range (DK) and the maximum stress intensity factor (Kmax). The two parameters are usually combined into one expression called often as the driving force and many various driving forces have been proposed up to date. The driving force can be successful as long as the stress intensity factor...

The variational discrete element method developed in [28] for dynamic elasto-plastic computations is adapted to compute the deformation of elastic Cosserat materials. In addition cellwise displacement degrees freedom (dofs), rotational dofs are added. A reconstruction devised obtain P 1 non-conforming polynomials each cell and thus constant strains stresses cell. requires only usual macroscopic...

Abstract The influence of fiber drawing on mechanical and vibrational properties RE-doped sol-gel silica is disclosed by a comparison bulk silica, before after the melting process, fibers. characterization carried out nanoindentation technique: hardness elastic modulus are found to be consistent with those Corning 7980 reference glass, related elasto-plastic behavior glassy material. Our result...

We study elasto-plastic deformations of unidirectional fiber reinforced polymeric composites (UFPCs) with fibers assumed to deform elastically and the matrix elasto-plastically. The matrix’s and hence composite’s plastic deformations are analyzed by using both the pressure-independent von Mises yield surface and the pressure-dependent Drucker–Prager yield surface and the associated flow rules. ...

This paper describes a stress-strain interpolation method to model the macroscopic anisotropic elasto-plastic behavior of polycrystalline materials. Accurate analytical descriptions of yield loci derived from crystallographic texture [Int. J. Plasticity 19 (2003) 647; J. Phys. IV France 105 (2003) 39] are an interesting alternative to finite element models, where the macroscopic stress is provi...

Simple and economical procedures for large-deformation elasto-plastic analysis of frames, whose members can be characterized as beams, are presented. An assumed stress approach is employed to derive the tangent stiffness of the beam, subjected in general to non-conservative type distributed loading. The beam is assumed to undergo arbitrarily large rigid rotations but small axial stretch and rel...

It is a highly nonlinear problem of 3-D elastoplastic contact with friction. To obtain the key information about the real size, displacement and traction in contact zone, the elements in contact and plastic zone should be subdivided. However, the increase of degrees of freedom is limited by the problem-solving scale when traditional BEM is used, for a larger memory size is required and the solu...

Chalk is the constituent material of numerous oil reservoirs in North Sea. The mechanical behaviour of a saturated chalk has been largely studied. However, different aspects of its behaviour are not yet well understood: material characteristics depend on the saturating fluids and chalk response is timedependent. This paper proposes the PASACHALK numerical model: an elasto-plastic constitutive l...