Cartilage material properties provide important insights into joint health, and cartilage material models are used in whole-joint finite element models. Although the biphasic model representing experimental creep indentation tests is commonly used to characterize cartilage, cartilage short-term response to loading is generally not characterized using the biphasic model. The purpose of this stud...

The nanoindentation experiment was carried out to estimate nanomechanical characteristics of polycarbonate polymer films. Hardness, effective elastic modulus and contact stress–strain rate curve were obtained. The results showed that the effective elastic modulus and the hardness decreased as the applied load was increased. As the hold time was increased, the effective elastic modulus and the h...

Original scientific paper Time-dependent deformations in soft rocks represent an important part of total deformations which occur after excavation of the tunnel opening. In the light of this, comprehensive laboratory uniaxial creep tests were performed on marl rock monolits. The testing used marl as a chosen representative rock samples of the group of soft rocks which exhibits creep behaviour. ...

This paper deals with the characterization and the modeling of the temperature effect on the piezoelectric tube actuator. Besides the sensitivity to the variation of the temperature, this actuator is characterized by the hysteresis and the creep non-linearities, the badly-damped vibration and the cross-couplings between its three axis. First, the characterization results of the sensitivity of t...

In the pressure vessel and piping and power industries, creep deformation has continued to be an important design consideration. Directionally solidified components have become commonplace. Creep deformation and damage is a common source of component failure. A considerable effort has gone into the study and development of constitutive models to account for such behavior. Creep deformation can ...

in this study, thermo-mechanical nonlinear vibration of a polyethylene (pe) cylindrical shell embedded in an elastic foundation was investigated. the shell is reinforced by armchair carbon nanotubes (cnts) where characteristics of the equivalent composite being determined using mori-tanaka model. the elastic medium is simulated using the spring constant of the winkler-type,  . employing nonline...

Laboratory studies on deformation of olivine in response to applied stress suggest two distinct deformation mechanisms in the earth’s upper mantle: diffusion creep through diffusion of atoms along grain boundaries and dislocation creep by slipping along crystallographic glide planes. Each mechanism has very different and important consequences on the dynamical evolution of the mantle and the de...

Recent studies concerning the fixation of cemented total hip arthroplasty (THA) have led to new hypotheses about the dynamic, long-term failure mechanisms leading to prosthetic loosening. As a result, the long-term mechanical behavior of acrylic bone cement has gained more interest since little is known about these properties. In this study, the dynamic, compressive creep deformation of acrylic...

Spinal segments show non-linear behaviour under axial compression. It is unclear to what extent this behaviour is attributable to the different components of the segment. In this study, we quantified the separate contributions of vertebral bodies and intervertebral discs to creep of a segment. Secondly, we investigated the contribution of bone and osteochondral endplate (endplates including car...