Self assembling wire networks typically evolve to minimize the resistance across electrical contacts which are frequently used in a manner comparable to Hebbian learning. In this work, we demonstrate that electrical fields can also be used to cause an increase in the resistance of the wire network. We show that if such a wire is exposed to a transverse electric field, the wire is deformed in a ...

This work presents the effect of various wear environments like 20% soil & 80% sand and 40% soil & 60% sand on as received and carburized mild steel sample at different load like 75N, 200N & 375N and at different tempering temperature like 200oC, 250oC & 300oC. The mild steel sample was carburized at 950oC. The heat treatment after carburization has been acknowledge that at some instant it impr...

BACKGROUND To evaluate a potential correlation between flexural strength and indirect tensile strength in assessing the mechanical strength of resin composite cements. METHODS Flexural strength (n = 5) and indirect tensile strength (n = 5) of 7 resin composite cements (RelyX Unicem 2 Automix [RXU], Panavia SA [PSA], Clearfil SA [CSA], Panavia F2.0 [PF2], Multilink Implant [MLI], DuoCem [DCM],...

in this research the effect of randomly reinforced soil and soil cement with different percent of cement and fiber and different length of fiber was investigated. samples were prepared according to the maximum dry unit weight and optimum water content due to the corresponding compaction curves. compressive and tensile strength were conducted on samples for different curing times. regression equ...

This research aims to produce non-structural concrete with mixed recycled aggregates (MRA) in upscaled applications with low-cement content. Four slabs were executed with concrete made with different ratios of coarse MRA (0%, 20%, 40% and 100%), using the mix design, the mixing procedures and the facilities from a nearby concrete production plant. The analysis of the long-term compressive and s...

Tenderness is the single most important factor influencing consumer acceptance of meat. The calpain proteolytic system is known to be responsible for the post-mortem tenderization of meat. The purpose of this study was to determine and compare the tensile strength and total calpain activities in different muscles of camel, cattle, sheep and goat. In camels, the effect of age and sex of animal w...

in this paper, after collecting the rock samples from eight mines and one high way slope, the tests for determination of dry density, uniaxial compressive strength, tensile strength (brazilian test), elastic modulus, schmidt hammer rebound number have been done on samples. in addition, in order to calculating the mean size of rock grains, quartz content, hardness and abrasivity, a thin sections...

Glycyrrhiza glabra extract is gaining increasing acceptance as a folk remedy for treatment of wound. We studied the effect of its extract on wound tensile strength in albino rats. 20 male albino rats had a linear 3 cm incision made over skin of back. The animals were randomly divided into two experimental groups, as control and treatment. Animals of control group received topical cold cream onc...