We investigated the implant-bone interface around one design of femoral stem, proximally coated with either a plasma-sprayed porous coating (plain porous) or a hydroxyapatite porous coating (porous HA), or which had been grit-blasted (Interlok). Of 165 patients implanted with a Bimetric hip hemiarthroplasty (Biomet, Bridgend, UK) specimens were retrieved from 58 at post-mortem. We estimated ing...

By restricting the dilated deformation, surface modification can stimulate multiple shear banding and improve the plasticity of bulk metallic glasses (BMGs). Aimed at modifying the surface of BMGs by thin layers, a crystalline Ni coating with ultrafine grains was coated on the surface of a Ti-based BMG by electroless plating. With a thickness of about 10 μm, the prepared thin coating could effe...

Experimental studies of gas-phase nanoparticle coating by photoinduced chemical vapor deposition (photoCVD) have shown that silica coatings can be produced with controllable thicknesses on different nanoparticle cores for a variety of applications. This study presents a chemical reaction sequence for the photo-CVD process to describe the production of silica coatings from the decomposition of t...

Nowadays, application of cermet coatings deposited by High-Velocity Oxygen-Fuel (HVOF) has received considerable attention in a variety of industries. Carbide coatings have high surface roughness, so it is essential to grind the coated surface. The present investigation studied the effect of simultaneous changes in the grinding parameters including the depth of cut, feed rate and cutting sp...

in this work, the effect of erosion on corrosion behavior of coal tar epoxy coating was evaluated usingelectrochemical impedance spectroscopy (eis) measurements. the surface morphology of the coatingwas examined by scanning electron microscope (sem) after 10, 20, 30, 45 and 60 min of erosion processat an impact angle of 90º. after 10 min of erosion process, the nyquist plots showed just a singl...

Print quality demands for coated papers are steadily growing, and achieving coating uniformity is crucial for high image sharpness, colour fidelity, and print uniformity. Coating uniformity may be divided into two scales: coating thickness uniformity and coating microstructure uniformity, the latter of which includes pigment, pore and binder distributions within the coating layer. This thesis c...

Scanning electron microscopy (SEM) has become a crucial tool to visualize the exterior morphology and surface structures for samples in both biology and material science. Conventional SEMs are usually limited by relative low resolution and charging effects. Carbon or metal coating is required for insulator samples to minimize charging effects. However, the coating layer can sometimes obscure mi...

In this work, a simple and effective way to modify the support surface is developed and a nanostructure ceramic support to facilitate deposition of a defect-free overlying micro and meso (nano) porous membrane is obtained. To achieve high performance nanocomposite membranes, average pore size of outer surface of support was reduced by dip-coating in submicron and nano α-alumina slurries. In...

In this work, polyimide (PI) was coated onto an ultrafine gilt molybdenum wire in order to protect the gilt surface and prepare an electrically stable wire mesh material which can be widely used in space. The surface of the PI-coated gilt molybdenum wires was characterized using FTIR, SEM, and EDS. Factors such as temperature stability of the PI coating, mechanical properties of the PI-coated g...