The disposal of used tires is a major environmental problem throughout the world which causes environmental hazards. Crumb rubber is a waste material that is ideal for use in concrete applications. The aim of this study is achieved to use of rubber waste as partial replacement of fine aggregate to produce rubberize concrete in M30 mix. Different partial replacements of crumb rubber (0, 5, 10, 1...

The present Experimental investigation is to study the Mechanical Properties of the Fly ash concrete reinforced with steel fibers. The concrete composite comprises of steel fibers in different percentages and partial replacement of cement in different proportions. Steel fibers varied from 0%, 0.5%, 1% and 1.5% by weight of cement and replacement of fly ash varied from 0%, 10%, 20%, 30% and 40% ...

This paper reports the strength behaviour of concrete containing three types of recycled polyethylene terephthalate (PET) aggregate. Results are also analysed to determine the PET-aggregate’s effect on the relationship between the flexural and splitting tensile strengths and compressive strength and to know whether the relationships between compressive strength and other strength characteristic...

structural sandwich beams are widely used because of their high specific stiffness and strength, noise reduction, thermal insulation and impact energy absorption characteristics. conventional manufacturing method of composite sandwich structures is completed by a separate adhesive joining stage by which the composite faces are joined to the core. in this investigation, liquid phase sintering in...

the hydraulic pressure is one of the most important factors in the design of pressure intake tunnels. since the surrounding media cannot usually resist the high internal pressure of these tunnels, they are usually finished with an adequate lining mostly of reinforced concrete, which is an interaction problem between water, soil or rock and concrete lining. although reinforcing the concrete lini...

an experimental program was carried out to investigate the behavior of steel, fiber reinforced concrete (sfrc) under abrasion and cycles of freeze and them. compression and flexural tests were also performed in order to reach a comprehensive conclusion of the response. in total, over 200 specimens were tested the test variables included two concrete strength., (i. e., 28 mpa as normal strength ...

The stability evaluation of the slope commonly uses limit equilibrium methods, for example, Fellenius’ method in Japan. The limit equilibrium methods have two limitations. (1) It is necessary to divide the sliding mass into slices, and to set up some additional equations to make the problem statically determinate. (2) It is necessary to search sliding surface with a minimum safety factor. Shear...

The assessment of rock slope stability is usually controlled by the presence discontinuities. block theory an established method in practical engineering to predict slopes. A maximum two discontinuity planes are considered application theory. It would lead inaccurate prediction slopes with multiple planes. novel for estimating safety margin proposed, which capable considering contribution all d...