Several building codes are available for the design of concrete structures reinforced with FRP; nevertheless knowledge on their structural behavior in case of fire is lack and no reliable design method is available. The experimental data available in the literature about the behavior of fiber-reinforced composite materials as well as of concrete slabs reinforced with FRP bars or grids at high t...

Recent advancements in metal fibers have introduced a promising new type of stainless steel fiber with high stiffness, high failure strain, and a thickness < 100 μm (<0.00394 in.) that can be utilized in a steel fiber-reinforced polymer. However, stainless steel is known to be susceptible to pitting corrosion. The main goal of this study is to compare the impact of corrosion on the mechanical p...

Externally bonded carbon-epoxy fiber-reinforced polymers (CFRPs) have been widely used to restore or increase the capacities of reinforced concrete beams (Meier et al., 1992; Neale and Labossière, 1997; Varastehpour and Hamelin, 1997). A typical reinforced concrete bridge deck may experience up to 7x10 stress cycles during the course of a 120year life span (Barnes and Mays, 1999), while an over...

A new formulation to model the mechanical behavior of high performance fiber reinforced cement composites with arbitrarily oriented short fibers is presented. The formulation can be considered as a two scale approach, in which the macroscopic model, at the structural level, takes into account the mesostructural phenomenon associated with the fiber-matrix interface bond/slip process. This phenom...

Twisted 0.375 30 80 2,300 1 Abstract—In order to supplement the brittle property of concrete, fibers are added into concrete mixtures. Compared to general concrete, various characteristics such as tensile strength, bending strength, bending toughness, and resistance to crack are superior, and even when cracks occur, improvements on toughness as well as resistance to shock are excellent due to t...

an experimental program was carried out to investigate the behavior of steel, fiber reinforced concrete (sfrc) under abrasion and cycles of freeze and them. compression and flexural tests were also performed in order to reach a comprehensive conclusion of the response. in total, over 200 specimens were tested the test variables included two concrete strength., (i. e., 28 mpa as normal strength ...

An analysis is given for the mechanical characteristics of multilayer elastomeric isolation bearings where the reinforcing elements-normally steel plates-are replaced by a fiber reinforcement. The fiber-reinforced isolator, in contrast to the steel-reinforced isolator (which is assumed to be rigid both in extension and flexure), is assumed to be flexible in extension, but completely without fle...

Hybrid fiber reinforced concrete (HFRC) consisting of two or more different types of fibers has been widely investigated because of its superior mechanical properties. In the present study, the effect of the addition of steel (0.25%, 0.5%, 0.75%, and 1% of concrete volume) and Polypropylene (0.2%, 0.4%, and 0.6% of concrete volume) fibers on the surface scaling resistance of concrete, depth of ...

high performance fiber reinforced cementitious composite (hpfrcc) materials exhibit strain hardening behavior with multiple cracking under tensile loading. in this paper, experimental and parametric studies are performed to assess the influence of using hpfrcc material instead of normal concrete in reinforced concrete beams. after calibrating the experimental results, the analytical results inc...

In this study, the flexural behavior of ultra-high-performance fiber-reinforced concrete (UHPFRC) is examined as a function of fiber length and volume fraction. Straight steel fiber with three different lengths (lf) of 13, 19.5, and 30 mm and four different volume fractions (vf) of 0.5%, 1.0%, 1.5%, and 2.0% are considered. Test results show that post-cracking flexural properties of UHPFRC, suc...