In an experimental study of laser sheet bending, a 160W diode laser is used for twodimensional sheet bending of low-carbon steel. The variables investigated include metal sheet thickness, laser scan speed, laser power, laser beam width, and laser scan pass number. Bend surface appearances are also analysed. The laser sheet bend results demonstrate that a 940Nm diode laser is an effective tool f...

BACKGROUND Self-expanding metal and plastic esophageal stents (SEMS and SEPS, respectively) are used in conjunction with chemoradiation for palliation of malignant dysphagia. To date, the dosimetric effects of stents undergoing proton radiotherapy are not known. STUDY AIM To investigate the proton radiotherapy dose perturbations caused by esophageal stents of varying designs and materials und...

The purpose of this study was to compare the dosimetric properties of small field electron beams shaped by circular Cerrobend blocks and stainless steel tubular applicators. Percentage depth dose curves, beam profiles, and output factors of small-size circular fields from 2 to 5 cm diameter, obtained either by tubular applicators and Cerrobend blocks, were measured for 6, 10, and 15 MeV electro...

Damage detection has been focused by researchers because of its importance in engineering practices. Therefore, different approaches have been presented to detect damage location in structures. However, the higher the accuracy of methods is required the more complex deliberations. Based on the conventional studies, it was observed that the damage locations and its size are associated with dynam...

The worldwide progress to date in experimental and computational studies on composite frame structures having rectangular concrete-filled steel tube (RCFT) beam-columns and steel girders and braces has revealed their exceptional seismic resistance. In this paper, a computational study to develop reliability-based performance-based seismic design guidelines of RCFT members is presented. A three-...

This study aims at exploring ways of making the use of bamboo reinforced concrete beams simple, efficient and cost-effective for rural construction with Ghana as a case study. It is a comparative study of bamboo reinforced concrete beams with shear links made of different materials. The web materials considered were bamboo, rattan cane and steel. Sixteen (16) beams were tested to failure under ...

The present work studies the synthesis and performance of TiC/H13 tool steel composite coatings obtained by the laser deposition technique. he effect of laser beam-scanning speeds and the concentrations of TiC in injected powder on the morphologies and microstructures of deposited eads are investigated. The results show that the beam-scanning speeds affect the size and morphology of the beads. ...

The construction of SACLA (SPring-8 Angstrom Compact free electron LAser) was already completed and it is under operation. A screen monitor (SCM) system has been developed and was installed in order to obtain a direct image of a transverse beam profile with a spatial resolution of about 10 m, which is required to investigate electron-beam properties, such as a beam emittance. The SCM originall...

SAE 1020 is a widely used plain carbon steel, as mortar reinforcement in buildings and small machine parts. But aside from good mechanical properties, its surface suffer from severe corrosion and high wear rate, due to modest hardness. Chromium (Cr) in excess of 12% in Fe alloys renders them resistant to several corrosive attacks. So we tried to introduce Cr in such amounts into the surface of ...

Results of an experimental investigation on the behavior and ultimate shear capacity of 27 reinforced concrete Transfer (deep) beams are summarized. The main variables were percent longitudinal (tension) steel (0.28 to 0.60%), percent horizontal web steel (0.60 to 2.40%), percent vertical steel (0.50 to 2.25%), percent orthogonal web steel, shear span-to-depth ratio (1.10 to 3.20) and cube conc...