Carrier flotation is a common technique used to improve flotation recovery of ultrafine ores. In this study, we used coarse polystyrene as the carrier material to enhance flotation recovery of fine smithsonite (ZnCO3) particles. Sodium oleate was used as the collector and played a role in the adhesion of fine smithsonite to polystyrene due to its amphipathic properties. The carrier feature of p...

Investigations were carried out on coal tailings by conventional cell and column flotation techniques. Tests were conducted to assess processing coal tailings of Alborz Markazi coal washing plant in Iran by column flotation. The effects of reagent type/dosage were investigated with conventional flotation and their results were used in the performance of column flotation. Also the effects of the...

Thermal-driven refrigeration systems have attracted increasing research and development interest in recent years. These systems do not cause ozone depletion and can reduce demand on electricity. The main objective of this work is to perform theoretical analyses of a thermal-driven refrigeration system using a new sorbent-sorptive pair as the working pair. The active component of sorbent is sodi...

A sensitive, selective and simple method for the simultaneous determination of carvedilol enantiomers in aqueous solution has been developed using stir bar sorptive extraction (SBSE) followed by high-performance liquid chromatography (HPLC) with ultraviolet (UV) detection. This method is based on the reaction of carvedilol enantiomers with (-)-menthyl chloroformate (MCF) after extraction by the...

Sulfide lead resources are being depleted and the exploitation of carbonate lead deposits is now the main focus of lead mining. Cerussite, PbCO3, is majorly discarded to tailing damps because it is difficult to be processed by flotation in lead concentration units. This paper not only investigates the optimization of cerussite flotation, but it also proposes a model for predict...

Mintek, specialists in mineral and metallurgical technology, have developed advanced optimisation control strategies in milling, flotation and smelting. The strategies address process specific problems namely downstream flow disturbances in flotation circuits from open milling circuits, fluctuating grade and recovery of flotation circuits and furnace fault conditions including power trips and e...

Multiple pesticides in water samples were successfully analyzed using an Agilent 5975T LTM GC/MSD equipped with an Agilent J&W DB-5ms Ultra Inert low thermal mass column module, with stir bar sorptive extraction and an Agilent Thermal Separation Probe for sample preparation. The method was simple, rapid, effective, and showed good linearity (R2 >0.9914) and high sensitivity for most of the targ...

A novel sulfamethazine molecularly imprinted polymer (MIP)-coated stir bar for sorptive extraction of eight sulfa drugs from biological samples was prepared. The MIP-coating was about 20 μm thickness with the relative standard deviation (RSD) of 6.7% (n=10). It was characterized by scanning electron microscope, infrared spectrum, thermogravimetric analysis, and solvent-resistant investigation, ...

Tamarind seed, a household waste from the kitchen is used for the sorptive removal of fluoride from synthetic aqueous solution as well as from field water samples. Batch sorptive defluoridation was conducted under variable experimental conditions such as pH, agitation time, initial fluoride concentration, particle size and sorbent dose. Maximum defluoridation was achieved at pH 7.0. Defluoridat...