A simplified version of the specific contact resistance measurement scheme of G. K. Reeves [Solid State Electronics 23, 487 (1980)] has been developed. Its applicability to semiconducting diamond is demonstrated using four sample types: epitaxial films doped to mid 1019 acceptors/cm3 on (100) and (110) type IIa substrates; type IIb diamonds 0.25 mm thick, and type IIb diamonds thinned to 0.035-...

OBJECTIVE To study exposure to cobalt and chromium in saw maintenance rooms and test respiratory health among saw filers at lumber mills. Hard-metal lung disease is associated with cobalt in the manufacture of tungsten carbide tools; recently it has also been reported among tool maintenance workers. Lumber mills often use saws tipped with tungsten carbide or with a newer alloy, stellite (contai...

Analyses were carried out on subscale cermet nozzles fired in the AMMRC solid propellant engine at a designated maximum chamber pressure of 1100 psi for nominal burning times of 15 jeconds in order to determine mechanisms of erosion and the effect of the carbide constituent on erosion. The cermet class investigated consisted of an AISI Type 316 stainless steel matrix incorporating a hard phase ...

A fast and accurate analytical method was established for the simultaneous direct determination of aluminum, calcium and iron in silicon carbide and silicon nitride powders by graphite furnace atomic absorption spectrometry using a slurry sampling technique and a Hitachi Model Z-9000 atomic absorption spectrometer. The slurry samples were prepared by the ultrasonication of silicon carbide or si...

During the past decade, polymer nanocomposites have emerged relatively as a new and rapidly developing class of composite materials and attracted considerable investment in research and development worldwide.Direct machining of polymers can be an option for personalized products and for manufacturing product samples. To obtain high quality products and reduce machining costs, it is very importa...

Production of hard-to-cut materials with uncoated carbide cutting tools in turning, not only cause tool life reduction but also, impairs the product surface roughness. In this paper, influence of hot machining method were studied and presented in two cases. Case1-Workpiece surface roughness quality with constant cutting parameter and 300◦C initial workpiece surface temperature. Case 2Tool tempe...

The optimum length of a monolith tube is one for which near-hundred percent conversion is attained, and at the same time, the catalyst over the ntire length of the tube is utilized. In practice, the length is adjusted by stacking monolith plugs end-to-end. In this study, the repercussions of uch a practice are investigated numerically with the goal to determine if a tube of length 2L demonstrat...

In this study, diamond films are deposited by using hot filament chemical vapor deposition (HFCVD), Nanocrystalline diamond (NCD) coated cemented tungsten carbide (WC-Co) milling tools are characterized, compared with microcrystalline diamond (MCD) and composite diamond coated ones, in terms of morphology with field emission scanning electron microscope (FESEM). Moreover, the diamond coated too...