We consider wire-driven parallel robot with N ≥ 4 wires that are connected at the same point on the platform. Such robot has 3 d.o.f. but it is non redundant (e.g. we cannot control the tension in the wires) as there will always be only at most 3 wires under tension simultaneously. We consider in this paper three approaches that make this robot really redundant: elasticity in the wires, using c...

This investigation measured the deactivation (unloading) force-deflection behavior of selected multistranded stainless steel orthodontic wires. The guidelines from the revised American National Standards Institute/American Dental Association Specification No. 32 for orthodontic wires (type 2, nonlinear elasticity) were used to perform a 3-point bending test to obtain data for the deactivation f...

AIMS To measure the friction force generated during sliding mechanics with conventional, self-ligating (Damon 3 mx, Smart Clip, and Time 3) and low-friction (Synergy) brackets using different archwire diameters and ligating systems in the presence of apical and buccal malalignments of the canine. METHODS An experimental setup reproducing the right buccal segment of the maxillary arch was desi...

Cables, such as are used in cable-stayed bridges, suspension bridges, guy wires, transmission lines, and flexible space structures, are prone to vibration due to their low inherent damping characteristics. The mitigation of cable vibration is necessary to minimize negative impact. Transversely-attached passive viscous dampers have been implemented on some cables to dampen vibration. However, it...

Cables, such as are used in cable-stayed bridges, suspension bridges, guy wires, transmission lines, and flexible space structures, are prone to vibration due to their low inherent damping characteristics. The mitigation of cable vibration is necessary to minimize negative impact. Transversely-attached passive viscous dampers have been implemented on some cables to dampen vibration. However, it...

most published results about the characteristics of niti wires are based on the mechanical laboratory tests on the as-received wires.the purpose of this study was to investigate the effect of saliva on load-deflection characteristics of superelastic niti wires.in this experimental study, 15 wires of three kinds of superelastic niti wires (sentalloy, force i and truflex) were prepared. five spec...

Mobile Ad hoc Networks (MANET) is a part of wireless networks. No wires and fixed routers are used in this type of network. It is not everlasting network; it is the short term network. Nodes has the capability to self organize themselves and it follows infrastructure less architecture. Network is formed by number of nodes moving in an inconsistent manner. They do not form any topology. Few exam...

OBJECTIVE The aim of this in vitro study was to evaluate the deflection-force behavior of nickel-titanium (NiTi) orthodontic wires adjacent to the portion submitted to heat treatment. MATERIAL AND METHODS A total of 106 segments of NiTi wires (0.019 x 0.025-in) and heat-activated NiTi wires (0.016 x 0.022-in) from four commercial brands were tested. The segments were obtained from 80 archwire...

BACKGROUND Application of light and continuous forces for optimum physiological response and least damage to the tooth supporting structures should be the primary aim of the orthodontist. Nickel titanium alloys with the properties of excellent spring back, super elasticity and wide range of action is one of the natural choices for the clinicians to achieve this goal. In recent periods, various ...

BACKGROUND This study aimed to compare superelastic and heat-activated nickel-titanium orthodontic wires' surface morphology and potential release of nickel ions following exposure to oral environment conditions. METHODS Twenty-four 20-mm-length distal cuts of superelastic (NiTi Force I®) and 24 20-mm-length distal cuts of heat-activated (Therma-Ti Lite®) nickel-titanium wires (American Ortho...