This paper develops a procedure for estimation of the rise velocity of a swarm of large gas bubbles in a bubble column operating in the churn-turbulent flow regime. The large bubble swarm velocity is estimated by introducing two correction factors into the classical Davies—Taylor (1950) relation for rise of a single spherical cap bubble in a liquid » b "0.71Jgd b (SF) (AF) . The scale correctio...

The performance of particulate-laden SO(2) scrubbing in a modified tapered bubble column with internals is reported in this article. The presence of particles improved the particulate-laden SO(2) removal efficiency to about 15% that was elucidated by the facilitated adsorptive mass transport. Experimentation revealed that nearly 100% removal efficiency of particulate-laden SO(2) was achievable ...

M ixing behavior of three geometrically equivalent 0.06 m bubble column and airlift photobioreactors was compared for use in microalgal culture. Mixing was characterized in terms of the axial dispersion coefficient, mixing time, circulation time and Bodenstein number. Measurements were reported in tap water and sea water, as used in growing microalgal biomass. Compared with the two airlift reac...

The effect of impeller speed on the air flow in a selfaerated Denver laboratory flotation cell was investigated using computational modelling. Air is induced into the slurry by the impeller’s rotating action. The rate of air flow is determined by the suction pressure created by the impeller, the hydrostatic head of the slurry and the frictional losses along the delivery shaft from the inlet val...

High-speed images of bubbly flow coupled with simultaneous passive acoustic measurements were carried out in a bubble column staged with structured fibrous catalysts. Local observations made with a high-speed camera system allow a detailed understanding of the influence of fabric structure on bubble formation processes and the determination of the Sauter bubble diameter. With acoustic measureme...

a shortcut procedure as quick, easy-to use method for design and simulation of multicomponent batch distillation is used to predict the operating condition of recovering xylene from solvent in an existing batch distillation column in benzol refinery. the procedure can be used to investigate the effect of the operating parameters on the operation of column for three possible modes of batch disti...

−Bacterial cellulose (BC) was produced by Acetobacter xylinum KJ1 in a modified airlift-type bubble column bioreactor, which had a low shear stress and high oxygen transfer rate (kLa). Saccharified food wastes (SFW) were used as the BC production medium due to its low cost. An aeration rate of 1.2 vvm (6 L/min) was tentatively determined as the optimal aeration condition in a 10 L spherical typ...

Fertilizer plant waste carbon slurry has been investigated after some processing as an adsorbent for the removal of dyes and phenols using columns. The results show that the carbonaceous adsorbent prepared from carbon slurry being porous and having appreciable surface area (380 m2/g) can remove dyes both cationic (meldola blue, methylene blue, chrysoidine G, crystal violet) as well a...

The performance of a hybrid bubble column/biofilter (HBCB) bioreactor for the removal of dichloromethane (DCM) from waste gas streams was studied in continuous mode for several months. The HBCB bioreactor consisted of two compartments: bubble column bioreactor removing DCM from liquid phase and biofilter removing DCM from gas phase. Effect of inlet DCM concentration on the elimination capacity ...